Anything To Play With This Stuff? Поделиться Опции

[MemWarrior]

Device connected
-> I/O Device connected
-> VID:22B8
-> PID:3002
-> StrDescr[1] Motorola Inc.
-> StrDescr[2] Motorola Phone (V975)
-> StrDescr[3] ED3F9710
-> StrDescr[4] Motorola Communication Class
-> StrDescr[5] Motorola Communication Interface
-> StrDescr[6] Audio Control Interface
-> StrDescr[7] Linear Streaming Audio MiCrophone Interface
-> StrDescr[8] Logarithmic Streaming Audio Microphone Interface
-> StrDescr[9] Linear Streaming Audio Speaker Interface?
-> StrDescr[10] Logarithmic Streaming Audio Speaker Interface
-> StrDescr[11] Motorola Accessory
-> StrDescr[12] Motorola MCU Data Logger
-> StrDescr[13] Motorola Test Command
-> StrDescr[14] Motorola DSP Logger
-> StrDescr[15] Motorola DSP Debugger
-> StrDescr[16] Motorola Data Interface
-> StrDescr[17] Test Command Only
-> StrDescr[18] DSP Debug Only
-> StrDescr[19] Motorola Full configuration
-> StrDescr[20] High bandwidth DSP Logging
-> StrDescr[21] DUN+DSP Debug
-> StrDescr[22] MCU Logging+DSP Debug
-> StrDescr[23] MCU Logging+test cmd+accy
-> StrDescr[24] MCU Logging Only
-> StrDescr[25] Motorola Network Monitor Communication Class?
-> StrDescr[26] Motorola Network Monitor Interface
-> StrDescr[27] TCMD+MCU logging+DSP logging
-> StrDescr[28] Motorola PTF
-> StrDescr[29] Motorola CDC Configuration
-> StrDescr[30] Motorola AP BP Configuration
-> StrDescr[31] Motorola IPC Interface
-> StrDescr[32] Motorola ACM1 Interface
-> Name:Motorola Phone (V975)
-> Driver key :{4D36E96D-E325-11CE-BFC1-08002BE10318}\0007
-> Type:Motorola USB Modem

[LiGHTaz]

MemWarrior, look here:
Games for E1000

As far as I know, V975 and E1000 are similar under characteristics.

[MemWarrior]

@Light ...

:) so, maybe first 7 years missing here...




if (PConnectionInfo^.ConnectionStatus = DeviceConnected) and (PConnectionInfo^.CurrentConfigurationValue <> 0) then
begin
if pConnectioninfo^.DeviceIsHub then
begin
statuswin.lines.add (' -> HUB connected');
externalhubname:=GetExternalHubName(hub,PConnectionInfo^.ConnectionIndex);
statuswin.lines.add(' -> External Hub Name:'+externalhubname);
dk:=GetDriverKeyName(hub,PConnectionInfo^.ConnectionIndex);
statuswin.lines.add (' -> Driver key :'+dk);
devin:=GetDevInst(dk);
statuswin.lines.add(' -> Type:'+GetDeviceDescription(devin));
Nodedev:=OpenDevice(externalhubname);
if not DeviceIoControl(NodeDev, IOCTL_USB_GET_NODE_INFORMATION,
@Nodeinfo, SizeOf(TUsbNodeInformation),
@Nodeinfo, SizeOf(TUsbNodeInformation), @nBytes, nil) then Exit;
GetPortData (NodeDev ,nodeinfo.HubInformation.HubDescriptor.bNumberOfPorts,0);

end
else
begin
statuswin.lines.add (' -> I/O Device connected');
Statuswin.lines.add (' -> VID:'+Inttohex(pConnectionInfo^.DeviceDescriptor.idVendor,2));
Statuswin.lines.add (' -> PID:'+Inttohex(pConnectionInfo^.DeviceDescriptor.idProduct,2));
for k:= 1 to 50 do
begin
std:= GetStringDescriptor(hub,PConnectionInfo^.ConnectionIndex,k,languageid);
if std <> '' then statuswin.lines.add (' -> StrDescr['+inttostr(k)+'] '+std)
else break;

end;



:D

oops ... i forget ...


Now my phone are V3X.


Must change profile.


Regards: MemWarrior