Новые настройки SEEM'ов (для Р2кАЕ и др.), для новых платформ (L7e/K1/Z3/L9) Поделиться Опции

[TEQUILA]

Последние дополнения отмечены.
------------------------------------------------------------------------------
Добавьте в файл 0032_001_Russian.csv:

Spoiler:

80 Возможность блокировать метки ( 1 Вкл 0 Откл )
508;Юникод в SMS ( 1 вкл 0 откл)
621; Достаточно отключить этот бит для просмотра сайтов ч/з стандарт. браузр (например, mini.opera.com) ( 1 Вкл 0 Откл )
676;Максимальное количество сетевых меток 50/30 ( 1 Вкл 0 Откл )
787;Параметри > Подключение >SuncML Синхронизация ( 1 вкл 0 откл)
804; Настр. Email сообщ. >Настр. учет. записи> Устан. учет. записи >Защита телефона ( 1 вкл 0 откл)
809; Инструменты > IM Сообщения ( 1 вкл 0 откл)
972; включает и отключает поддержку вспышки на z3 ( 1 вкл 0 откл)
986;Параметры - Состояние телефона - опция [Обновление ПО] (1-вкл,0-откл)
996;В списке Java Меню - опция [Включить защиту] (1-вкл,0-откл)
1104;Включение вспышки в режиме видоискателя кнопкой "*" (Z3) (1-вкл, 0-откл)
1163;Длинное нажатие кнопки камеры активирует видеокамеру, но короткое нажатие не реагирует (1 Вкл 0 Откл )
1172;Автовыключение блютуз (1 вкл 0 откл) - выключите его.
1175;Меню Последние вызовы (1-вкл,0-откл)
1176;Параметры > Состояние телефона (1 Вкл 0 Откл )
1177;Параметры > Личные настройки (1 Вкл 0 Откл )
1178;Параметры > Сеть оператора (1 Вкл 0 Откл )
1179;Параметры > Стили оповещений (1 Вкл 0 Откл )
1180;Параметры > Защита телефона (1 Вкл 0 Откл )
1181;Параметры > Основная Настройка (1 Вкл 0 Откл )
1183;Главное меню > Сообщения (1 Вкл 0 Откл )
1184;Параметры > Настройка для Авто (1 Вкл 0 Откл )
1185;Параметры > Настройка Гарнитуры (1 Вкл 0 Откл )
1187;Параметры > Настройка Вызова (1 Вкл 0 Откл )
1188 Главное меню > Справочник (1 Вкл 0 Откл )
1189 Инструменты > Метки (требуются редактирование mma_ucp ) ( 1 Вкл 0 Откл )
1190;Параметры > Сеть оператора > Сигнал соединения (1-вкл,0-откл)
1195;Пункт меню "Активный вызов"(1 Вкл 0 Откл )
1198;Настройки интернет > Закладки (1 Вкл 0 Откл )
1214;Возобновление прерванной закачки браузером (1-вкл,0-откл)
1228; Аналоговые часы на внешнем экране (for K1) (1-вкл,0-откл)
1232;Параметры > Настройка вызовов > Варианты ответа > Задержанный ответ (1-вкл,0-откл)
1236;Прозрачные иконки управления картинками и надписи (Размер, дата) (1 Вкл 0 Откл )
1242;Возможность просмотреть снятое видео перед сохранением или отправкой (1-просмотр и сохранение,0-только сохранение)
1273;Полноэкранный просмотр изображений (K1,L7e,Z3) (1-вкл,0-отк)
1274;Не переключать стили вызова при подключении кабеля (1-вкл,0-откл)
1276;Возможность создавать EMS (K1,L7e,Z3) (1-откл,0-ВКЛ)
1294;Ежедневник > Настройка > лунный календарь (1-вкл,0-откл)
1298;Настр. Email сообщений> Фильтр SPAM ( 1 вкл 0 откл)
1301;Предпросмотр картинок мозаикой 2х2 (1-вкл,0-откл)
1317;Сообщения > Варианты > Переместить в важные (1-вкл,0-выкл)
1338;Сообщение > Настройки > Фильтр SPAM (1-вкл,0-откл)
1339;Доступно уведомление о спам-сообщениях (1-вкл,0-откл)
1341;Сообщения > Настройка > Инфо > Быстрый просмотр (1-откл,0-ВКЛ)
1363;Подключение > MOTOSYNC > Обмен данными (1-вкл,0-откл)
1365;Параметры -> Основная настройка -> Время и дата -> Установка оператором -> Только время (1-вкл,0-откл)
1395;Records automatically using Voice Msg (1-вкл,0-откл)
1431;Установление сигнала вызова от внешнего устройства памяти. (0-только с телефона, 1-и с тела и с флеш)
1439;При подключении к USB показывать на экране индикатор: модем или карта памяти (и сообщение: "Отсоедините кабель..") (1-показывать,0-не показывать)
1440;Сохранение последних получателей сообщений (1-не сохранять, 0-сохранять)
1442;Настр. Email сообщений> Штамп врем. эл.п ( 1 вкл 0 откл)
1446;Таймер блокировки клавиатуры (при заблокированной клавиатуре отключена кнопка ОК) (1-вкл,0-откл)
1480;Личные настройки > Заголовки (для Screen3) (1-вкл,0-откл)
1481;Параметры > Основная настройка > Выделение текста (1-вкл,0-откл)
1483;Отчет о доставке СМС по умолчанию (бит 1276 должен быть выкл) (1-вкл,0-выкл)
1491;Если ВКЛЮЧЕНО, когда флип закрыт и аудиоплеер, играет в фоне, пользователь может управлять плеером (1-вкл,0-выкл)
1511;Выбор устройства хранения (телефон/карта) в Мультимедии и Яве (1-общий список,0-разделенный)(бит 1512 должен быть ВЫКЛ)
1513;Возможность разговаривать (по внутреннему динамику) при закрытом слайдере (Z3) (1-вкл,0-откл)
1515;Параметры > Личные > Параметры звука (проговаривает имена контактов и цифры при наборе) (1-вкл,0-откл)
1526;Иконки или список в подменю (1-иконки,0-список)
2128;Убрать надпись EDGE с экрана (бит 2129 должен быть вкл) (1-вкл,0-откл)
2129;Убрать надпись EDGE с экрана (бит 2128 должен быть вкл) (1-вкл,0-откл)

[close]

Файлы 0032_001:

0032_0001.rar   ( 89.08 килобайт ) Кол-во скачиваний: 7038

------------------------------------------------------------------------------
Добавьте в файл 004A_001_Russian.csv:

Spoiler:

616;"Работа телефона без SIM-карты (1-выкл,0-вкл)"
3488;"Сортировка файлов - по имени или по времени (0-по имени, 1-по времени)"
3584;"Статический экран загрузки (00-Hellomoto, 01-Часики, 02-CMCC)"
3944;"Стиль звонка при удержании '#' (K1,L7e,Z3) (1-офис,2-вибро,3-вибро->звонок,4-бесшумный,5-вибро и звонок)"
4152;"Зарядка по USB (L6,L7,V360)(1-вкл,0-выкл)"
4216;"Пункт 'Новая картинка' в конце списка картинок (1-в конце, 0-в начале)"
4288;"Наличие оператора и даты на основном экране (00-убрать, 01-показать)"
4344;"Сортировка тел. книги (K1,L7e,Z3) (1-по фамилии,0-по имени)"
4496;"Сообщения > Настройка текст сообщ > Фильтр по SPAM (0-Выкл; 1-Вкл)"
4552;"Включение диктофона (K1,L7e,Z3) (1-включено,0-отключено)"
4856;"Наличие часов на основном экране (00-показать, 01-убрать)"
4952;"Запись видео с разрешением 352x288 (!на карту памяти!) (K1,L7e,Z3) (1-доступно,0-недоступно)"
5600;"AIM - Максимальное ожидание сервером AOL"
Внимание! Бит 616;"Работа телефона без SIM-карты (1-выкл,0-вкл)" НЕ ПОЗВОЛИТ ИСПОЛЬЗОВАТЬ ТЕЛЕФОН КАК МОДЕМ!!! Выход в инет будет только с самого телефона. Будьте осторожны!!!

[close]

Файлы 004A_001:

004A_0001.rar   ( 20.48 килобайт ) Кол-во скачиваний: 5248

------------------------------------------------------------------------------
Добавьте в файл 004E_001_Russian.csv:

Spoiler:

1568;Max. время поиска устройств по BT
1600;Min. время поиска устройств по BT
1776;"значения в сек. для выбора автоблокировки клавиатуры"
5600;"Число цифр для сравнения номера звонящего с записью в справочнике"
8320;"Максимальный размер видеофайла при записи на карту памяти в байтах"
8352;"Максимальная продолжительность видеофайла при записи на карту памяти в секундах"
8416;"Максимальный размер видеофайла при записи на память телефона в байтах"
8448;"Максимальная продолжительность видеофайла при записи на память телефона в секундах"
9024;"Сжатие в фотокамере. Максимальное значение 64 (hex) или 100 (dec)"
11008;"Время доступности телефона для обнаружения по Bluetooth в минутах (1 или 3)"
11648;"Максимальный размер файла голосовой записи на карту памяти в байтах"
11712;"Максимальный размер файла голосовой записи на память телефона в байтах"

[close]

Файлы 004E_001:

004E_0001.rar   ( 6.47 килобайт ) Кол-во скачиваний: 4048

ИНСТРУКЦИИ:

Как применить настройки. Инструкция на примере Р2к АЕ
Как применить настройки. Инструкция от grudovik на примере P2k Tools 3. ПОНЯТНЕЕ НЕКУДА!

SEEM, отличные от 0032, 004А и 004Е правим программами UniМoto или P2k Tools 3.

Скачать P2k Tools 3
Скачать UniМoto
Скачать P2k AE
Библиотека для корректной работы Р2к АЕ:

p2kapi2.rar   ( 5.32 килобайт ) Кол-во скачиваний: 9597

Все ВОЗНИКШИЕ вопросы удаляются после их решения. Все глупые или ответ на которые есть на форуме - немедленно!

Пополняйте - и да воздасться вам плюсов! Но не забудьте оформить так, как в шапке!

Сообщение отредактировал ShaDReaS - 10.12.2009, 18:29

[Scinex]

http://www.modmymoto.com/forums/showthread.php?t=12621

Буржуи раскопали массу Симов для Райзера...думаю и нам подойдут

[Scinex]

Проверьте кто-нить...правда это для Райзера было выложено...

SEEM 0032_0001:
offset 89 - bit 5: Swap Soft Keys
offset 92 - bit 7: Settings > Recent Calls (1 on, 0 off)
offset 9A - bit 0: Settings > In-Call Setup > Answer Options > Delayed Answer (1 on, 0 off)
offset 9F - bit 1: Multimedia > Pictures > Options > Picture Setup > Full Screen (1 on, 0 off)
offset 9F - bit 4: (1 to off/0 to on) Turn Delivery Report (by treetzyman)
offset A8 - bit 6: Multimedia > Voice Records > Options > Voice Recorder Setup > Record Quality (1 on, 0 off)
offset A8 - bit 7: Multimedia > Voice Records > Options > Voice Recorder Setup > Record Length (1 on, 0 off)
offset A9 - bit 1: Show left and right soft keys on Settings > Personalize > Home screen > Home keys (1 off, 0 on)
offset AB - bit 0: World Clock (1 on, 0 off) (menu item, may require update to mma files)
offset AE - bit 5: Settings > Security > Sidekey Lock Options (1 enables, 0 disables) Sidekey lock (status); Sidekey shortcut
offset B9 - bit 1: Settings > Initial Setup > Text Marquee options (1 on, 0 off)

Меня сильно не бейте, за что купил, за то продаю

[TEQUILA]: те что проверил и перенес в шапку отсюда удалил, буду по мере возможности еще смотреть.

Сообщение отредактировал TEQUILA - 10.5.2007, 21:06

[Nur87]

offset 89 - bit 5: Swap Soft Keys - поменять местами софт клавы
offset 9F - bit 1: Multimedia > Pictures > Options > Picture Setup > Full Screen (1 on, 0 off) - это у меня не работало
offset A9 - bit 1: Show left and right soft keys on Settings > Personalize > Home screen > Home keys (1 off, 0 on) - после него в параметрах не входит в параметры рабочего стола

с остальными ничего не заметил

Сообщение отредактировал TEQUILA - 10.5.2007, 21:07

[TEQUILA]

Внимание!
С опцией 616;Работа телефона без SIM-карты (1-выкл,0-вкл) невозможно использовать телефон как gprs-модем по кабелю или БТ! (Через броузер с самого телефона в инет выходит).
Это чтобы не было потом вопросов по этому поводу

Сообщение отредактировал TEQUILA - 13.4.2007, 5:06

[Shoorf]

Ограничение длительности видео
Ограничение прописывается в симе 004E x 0001:
При записи на карту памяти
1) офсет 0410-0413 – ограничение по размеру в БАЙТАХ (по умолчанию 00 A0 00 00 – 10Мб)
2) офсет 0414-0417 – ограничение по времени в СЕКУНДАХ (по умолчанию 00 00 01 F4 – 500с)
При записи на внутреннюю память
1) офсет 041С-041F – ограничение по размеру в БАЙТАХ (по умолчанию 00 10 00 00 – 1Мб)
2) офсет 0420-0423 – ограничение по времени в СЕКУНДАХ (по умолчанию 00 00 01 F4 – 500с)

Для снятия ограничений проставить все значения в: 00 00 00 00

Ограничение длительности аудио
Ограничение прописывается в симе 004E x 0001:
При записи на карту памяти
Офсет 05B0-05B3 – ограничение по размеру в байтах (по умолчанию 00 9C A0 00 – 10024кб)
При записи на внутреннюю память
Офсет 05B8-05BB – ограничение по размеру в байтах (по умолчанию 00 0F A0 00 – 1000кб)

Для снятия ограничений проставить все значения в: 00 00 00 00

----

Проверено на модели телефона SLVR L7e

[GandjaFuzz]

Cим 0032_0001
1338;"Сообщение - Настройки - Фильтр по SPAM - 1 вкл 0 выкл"
1480;"Личные настройки - Заголовки (в пункт не заходит говорит, загрузка первоначального меню, нужно найти второй бит который этот блок убирает, тогда будет возможно настраивать пункт варианты на левой софт клавише)"
так же ещё есть 2 интересных биты в симе 32
Анимация на рабочем столе и доставка смс по умолчанию - всегда включена...скоро найду их

Сообщение отредактировал GandjaFuzz - 2.5.2007, 17:00

[GandjaFuzz]

павлеГ,
все неопределённые сообщения он обзывает...Новое Spam сообщение...
*НеХеR*,
на счёт заголовок...в симе 32 есть актвирующий бит функции блокирующие это меню для корелета...т.е. пункты есть но настройки его устанавливает корелет...это тоже самое когда поставили прошивку 04.05R в пунты параметры раб.экрана не заходит и заголовки...как разблокировать параметры раб. экрана я нашёл а как заголовок пока что нет

Сообщение отредактировал GandjaFuzz - 2.5.2007, 10:23

[TEQUILA]

Странно...но у меня мелодия звонка играет из динамика, а не из наушников! Это что, только у меня?!

Короче, никто не захотел искать, пришлось мне... а наткнулся случайно:
Бит 937 - EARPHONE RINGER OPTION - при включении мелодия играет И В ДИНАМИКЕ ТЕЛЕФОНА, не только в "ушах"

[KoLoB88]

Короче, никто не захотел искать, пришлось мне... а наткнулся случайно:
Бит 937 - EARPHONE RINGER OPTION - при включении мелодия играет И В ДИНАМИКЕ ТЕЛЕФОНА, не только в "ушах"

Кстати это можно сделать и без Сима.
Настройки>Настройки для Авто>Ативиз.гарнитуры

Если включено, то мелодия вызова идет через гарнитуру.
Если выключено - мелодия через динамик (даже при включенном плеере)

З.Ы. Инфу можно добавить в шапку темы про Л7е

[*НеХеR*]

Вычислил пункт "Важные сообщения". Также появится пункт переместить в важные
В 32 симе пересечение строки 0A0 и столбца 04 бит 5 включите.

Пункт "переместить в важные" появился. Перемещаю и больше найти их не могу . Самого пункта "важные сообщения" у мну почему то не появилось. Может его каким другим битом включать или еще что?

[Respected]

Вот кое-что с МотоХ'а.

добавлено

Дальше без перевода и без правки

Remove Operator, Date, and Clock on the main screen:

if you already have the clock on the main screen enabled.
seem 004a_0001 - offset 25F - set value to 01
seem 004a_0001 - offset 218 - set value to 00

if you don't have the clock on the main screen.
seem 004a_0001 - offset 218 - set value to 00

To Change number of calls displayed maxium is currently 60.
SEEM 0050_0001/0051_0001 controls number of entries in received/dialed numbers list both offsets must be changed
offset 8F - set to number of calls you want in hex (ie. "14" would give you 20 calls; "32" gives you 50 calls; max out at "3C" for 60 calls)
offset 93 - set to number of calls you want in hex (ie. "14" would give you 20 calls; "32" gives you 50 calls; max out at "3C" for 60 calls)

offset A2 - bit 7: Multimedia > Videos > Options > Videos Setup > Full Screen (1 on, 0 off)
offset A8 - bit 6: Multimedia > Voice Records > Options > Voice Recorder Setup > Record Quality (1 on, 0 off)
offset A8 - bit 7: Multimedia > Voice Records > Options > Voice Recorder Setup > Record Length (1 on, 0 off)
offset A9 - bit 1: Show left and right soft keys on Settings > Personalize > Home screen > Home keys (1 off, 0 on)
offset AB - bit 0: WorldClock (1 enable, 0 disable) requires mma_ucp file with the worldclock ; necessary files in /a/mobile/worldclock/)

Ps. извиняюсь, что не оформлено.

Сообщение отредактировал TEQUILA - 10.5.2007, 21:01

[GandjaFuzz]

{RTS}UFO,
в симе 0363_0001 затри просто слово EDGE, он у тебя вместо даты больше никогда не появится...а при работе его он как всегда на своём месте(надпись)

[against25]

Вроде ещё не было... Сорьки, что без оформления...
Добавляет предельный размер MMS равный 300 Kб, изменяем:
SEEM 0032-0001 offset 7F bit 0: (установить на вкл.)
SEEM 004e-0001 offset 2e1 bit 2: (установить на вкл.)
SEEM 004e-0001 offset 2e2 bit 4, 5 & 7: (все установить на вкл.)
SEEM 004f-0001 offset 2e1 bit 2: (установить на вкл.)
SEEM 004f-0001 offset 2e2 bit 4, 5 & 7: (все установить на вкл.)

Сообщение отредактировал against25 - 28.5.2007, 14:39

[TEQUILA]

Добро пожаловать: "Важные сообщения"

[danger86]

Для ризра:
Улучшенное видео и фото качество
seem 004e_0001 off 48B 64
seem 004e_0001 off 4CB 07
seem 004e_0001 off 490-49F 00
seem 004e_0001 off 4A0-4AF 00
seem 004e_0001 off 49B 18
seem 004e_0001 off 4A3 30
seem 004e_0001 off 4AF 10
seem 004e_0001 off 4B3 03
seem 004e_0001 off 4AB 80

Поставил. Результат есть. Одобрено. Оформляй (до 26-го "+" не могу поставить, сорри)

...далее нетестированное...
Для L72:
Снижена компрессия видео
seem 004e_0001 off 44A-44B 01 00 (Стандартное 00 60)-Хорошее
seem 004e_0001 off 44E-44F 01 00 (Стандартное 00 80)-Лучшее
seem 004e_0001 off 452-453 01 00 (Стандартное 01 00)-Самое лучшее
seem 004e_0001 off 65E-65F 01 80 (Стандартное 01 80)-352х288

Тот самый владелец L72 говорит, что у него фотки занимают до 700 кБ с такими настройками:
seem 004e_0001 off 711-713 FF или 01
seem 004e_0001 off 714 00

ГОСПОДА, тестируем и отписываемся

Сообщение отредактировал TEQUILA - 4.7.2007, 11:46

[grudovik]

Из того что попробовал:

Статический экран загрузки
seem 004a_0001 off 1C0
00 Hellomoto
01 Часики
02 CMCC

00 - действительно Hellomoto
01 - при загрузке картинка такая - красный фон и на экране на 5и языках (как я понял) написано Welcome. (русского нет)
02 - снова Hellomoto
------------------------------------------------------------------

Для крайзра:
Показывать часы на внешнем экране
seem 004a_0001 off 25F 00

Удалить оператора, дату и часы с внешнего экрана
1) Если часы включены:
seem 004a_0001 off 25F 01
seem 004a_0001 off 218 00
2) Если часы выключены:
seem 004a_0001 off 218 00

Все правильно, только это относится НЕ к внешнему, а к внутреннему экрану (на внешнем как раз-то все остается)
------------------------------------------------------------------

Тот самый владелец L72 говорит, что у него фотки занимают до 700 кБ с такими настройками:
seem 004e_0001 off 711-713 FF или 01
seem 004e_0001 off 714 00

Ставил и FF и 01 - размер не изменяется, все те же 300-600 кб (это я говорю только о вышеотмеченных симах)
------------------------------------------------------------------

По мере тестирования, результаты допишу в свое сообщение...
Пост долговременной общественной пользы не имеет, после вынесения "приговора" обсуждаемым симам, подлежит удалению )))

Сообщение отредактировал grudovik - 30.6.2007, 21:41

[sanitar]

4856;"Наличие часов на основном экране (00-показать, 01-убрать)"

Вместе с часами убирается дата и оператор и ещё исчезает быстрый доступ с джойстика.

[danger86]

sanitar,
Оффсеты 4288 и 4856 работают вместе. Насчет джойстика - не замечал, нужно попробовать

[Archy]

У меня на прошивке 04.05 (Л7и)
Статический экран загрузки
seem 004a_0001 off 1C0
00 Hellomoto - верно
01 Часики - большие песочные часы на черном фоне
02 CMCC - красный фон и на нем чей-то белый переплетающийся логотип.

[Archy]

616;"Работа телефона без SIM-карты (1-откл, 0-вкл)"

Да, чуть не забыл. У меня с этим симом сим-карта не запрашивает пин-код и, соотв., не видит сеть.

[psyx1980]

grudovik
Статический экран загрузки
seem 004a_0001 off 1C0
00 Hellomoto
01 Часики
02 CMCC
Из того что попробовал:
00 - действительно Hellomoto
01 - при загрузке картинка такая - красный фон и на экране на 5и языках (как я понял) написано Welcome. (русского нет)
02 - снова Hellomoto

песочные часики появятся если сменишь прошивку на 452F, на R4527_G_08.22.11R все как ты написал

Сообщение отредактировал psyx1980 - 15.7.2007, 13:46

[danger86]

Код

5600;"Число цифр для сравнения номера звонящего с записью в справочнике"

Что за прикол? В P2KAE написано, что это Maximum amount of time in seconds that a response message from AOL server is expected. Хотя по умолчанию стоит 8

Вот, такой прикол. Все-таки Р2к АЕ 2 года, не все в моторах осталось как было (а может Booroondook ошибся)

Сообщение отредактировал TEQUILA - 15.7.2007, 16:59

[bigserg555]

Вычислил чтоб при заходе в мультимедиа тел сохранял устройство хранения.Т.е. чтоб отображалось не "ВСЕ" устройства одновременно,а то которое вы раньше выбирали.
Для этого в 32 симе на пересечении строки 0B0 и столбца ОС отключите бит 7.У меня работает.
В P2KAE это бит 1511 - отключаем его.
Но при этом пропадёт пункт "Все",но думаю он не особо нужен многим

Сообщение отредактировал bigserg555 - 17.7.2007, 9:45

[Bent]

Люди, а может кто-нибудь выложить готовый 004e_0001 сим с изминениями для камеры?

GMD, Вот держи... там не только камера, но ещё увеличено запись диктафона и видео на телефон как Мб, так и время(секунды)... для карты памяти не делал - у меня её нет

Сообщение отредактировал bigserg555 - 24.7.2008, 16:46

[лекарство]

bigserg555,
Вот и нашел мелкий баг после отключения этого бита: в видеокамере не переключается устройство хранения, хотя в фотокамере нормально

Заходишь в видеоклипы/новое видео и переключаешь устройство хранения, и весь баг ))

[TEQUILA]

лекарство, молодец, получи +

Естественно, ведь телефон запоминает последнее выбранное устр-во хранения, и если это телефон, то в телефон и пишет.

[bigserg555]

Люди,после отключения бита 1511;Выбор устройства хранения (телефон/карта) в Мультимедии и Яве (1-общий список,0-разделенный) у вас в яву нормально заходит? без багов?

[psyx1980]

Люди,после отключения бита 1511;Выбор устройства хранения (телефон/карта) в Мультимедии и Яве (1-общий список,0-разделенный) у вас в яву нормально заходит? без багов?

абсолютно нормально, а что за баг должен быть, если не секрет?

Добавлено позже (20.7.2007, 14:30):

Motorola L9

1483;Отчет о доставке СМС по умолчанию (бит 1276 должен быть выкл) (1-вкл,0-выкл)

странно, у меня отчет включен, хотя 1483 выкл...

[Osta]

1483;Отчет о доставке СМС по умолчанию

согласен , так и написано
SEEM 0032_0001, Смещ-е B9 h/185d, Бит 3 (Абс.бит 1483):
MESSAGE_RECEIPT_ON_AVAILABLE
/* This Feature ID indicates the default value for the receipt report. When it has the value 1 (on), it indicates that the default value for the receipt report is Yes. When it has the value 0 (off), it indicates that the default value for the receipt report is No. */

1338;"Сообщение - Настройки - Фильтр по SPAM - 1 вкл 0 выкл"

да
SEEM 0032_0001, Смещ-е A7 h/167d, Бит 2 (Абс.бит 1338): MSG_SPAM_FILTER_AVAILABLE
/* Spam Messaging Filter will be a flexible feature. The feature availability will be controled by the carrier. * When set is on, upon receiving a new message the terminal will examine the originating number of the received message. If this number matches one stored in the Phonebook, then current behavior will be followed. If the number does not match one stored in the Phonebook or is unavailable, the message will be marked as SPAM. * When set to Off, current behavior will be followed. */

1480;"Личные настройки - Заголовки

да
SEEM 0032_0001, Смещ-е B9 h/185d, Бит 0 (Абс.бит 1480): PERSONALIZE_HEADLINES_AVAILABLE
/* (for 3G Only) If this flex bit is ON, the Headlines menu item will be available. */

Вычислил чтоб при заходе в мультимедиа тел сохранял устройство хранения.Т.е. чтоб отображалось не "ВСЕ" устройства одновременно,а то которое вы раньше выбирали.
Для этого в 32 симе на пересечении строки 0B0 и столбца ОС отключите бит 7.У меня работает.
В P2KAE это бит 1511 - отключаем его.

называется этот бит
SEEM 0032_0001, Смещ-е BC h/188d, Бит 7 (Абс.бит 1511): TRANSPARENT_STORAGE_HOT_SWAP_AVAILABLE
/* This feature id will be used to enable/disable feature 12604 - Transparent Storage with Hot Swap. If value of this feature id is ON then all functionality for support of feature 12604 is enabled. If value of this feature id is OFF then all functionality for support of feature 12604 is disabled. The transparent storage with hotswap feature covers the main use case of supporting the Vodafone transparent storage feature while also having hotswappable removable memory. Transparent storage simply allowed the user to switch the storage devices by having a selectable item in the audio, video, and pictures folder summary list and added combined lists to the native audio, video, and picture viewer applications. It also covers the use cases of removing / inserting the memory card while currently viewing media or java apps. */

и есть куча других интересных битов

CODE

1155;"DRM_CONTENT_INSTALL_NOTIFY_AVAILABLE";/* (When flexed on) After the phone receives OMA DRM content file, the OMA DRM app will send the Install-Notify to the server, which trigger the server to send the rights to the phone. Required by VFD-CP-0013-2 */
1156;"BROWSER_SKIP_KJAVA_DOWNLOAD_SIZE_CHECK_AVAILABLE"; While downloading Kjava JAR file, check wheather to compare download file size against the MIDLET-Jar-Size value in the JAD file.
1157;"VODAFONE_LIVECAST_FEATURE_AVAILABLE"; /* Feature Id is to keep the vodafone livecast functionality on the JUIX based phones. */
1158;"SCAN_ON_USER_ACTIVATION_AVAILABLE"/* when user phones clamp or unlocks the screen phone should start scan if it is in no service or emergency state. */
1159;"BLUETOOTH_PRINTING_AVAILABLE";/* To enable/disable the bluetooth printing feature. Bluetooth must be on before enabling this feature. See SUIS at http://compass.mot.com/go/suis8974 to verify where the Print menu item should show up. */
1160;"BLUETOOTH_IMAGING_AVAILABLE"; /* To enable/disable the bluetooth imaging feature. Bluetooth must be on before enabling this feature. */
1161;"ID_MY_TONES_AVAILABLE"; Enables/Disables the Alert Tone customization feature.
1162;"MMS_BASIC_IMAGE_RESIZE_AVAILABLE"; Flex bit, which determines if image resize feature is present or not.
1163;"MMC_COMBINE_CAMERA_KEY_AVAILABLE"; A long press of the camera key shall activate the video viewfinder, a short press shall activate tha camera viewfinder. In camera/video application a long press shall switch to the other video/camera mode, while a short press capture the image/video.
1164;"BASETRACK_RINGER_AVAILABLE"; Add/Remove the motomixer basetracks (*.bas) from Ring Styles list
1165;"SEND_IN_EMAIL_AVAILABLE"; Functionality in this feature is to make it a flexible option to show email as a viable transport for sending media from camera mode or from multimedia folder
1169;"BROWSER_IMEI_USER_EDITABLE_AVAILABLE"; FOR 3G ONLY: TRS11233 specifies that the user should be able to control whether the IMEI number of the phone be sent to the server along with the vodafone KK user agnet header or not. This feature ID specifies whether the option " IMEI notification" be available for user editing within web access menu -> browser setup or not.
1170;"KJAVA_REMOVABLE_STORAGE_AVAILABLE";"Games&Apps > Menu > Switch storage device (1 on, 0 off)"
1172;"BLUETOOTH_PERMANENT_POWERON_AVAILABLE"; This feature id is to make Bluetooth permanent power on flexiable. If the bit is ON, when the user tries to use Bluetooth and Bluetooth power is off, we will permanently turn BT power on. Otherwise, we will temporarily turn BT power on, which is current behavior.
1173;"UMAN_NETWORK_SELECTION_MENU_AVAILABLE"; This feature id is to make UMA network selection menu flexible. If this bit is ON, Access Point Priority item will show up in Bluetooth Setup menu. Otherwise, there will be no such item in Bluetooth Setup menu.
1174;"BLC_IN_KEYPADLOCKED_AVAILABLE"; If this feature is AVAILABLE then backlight comes when keypad is locked and keypress is done. The backlight timer behaves as per MRS when keypad is locked.
1175;"RECENT_CALL_AVAILABLE";/* This flex bit is used to determine whether recent call application is available or not.*/
1176;"PH_STATUS_AVAILABLE";/* This flex bit is used to determine whether Phone Status application is available or not */
1177;"PERSONALIZE_AVAILABLE";/* This flex bit is used to determine whether Personalize application is available or not. */
1178;"NETWK_AVAILABLE";/* This flex bit determines whether Networks Available application is available or not. */
1179;"RING_STYLES_AVAILABLE";/* This flex bit is used to determine whether Ring Styles application is available or not. */
1180;"SECURITY_AVAILABLE";/* This flex bit is used to determine whether Security application is available or not. */
1181;"INITIAL_SETUP_AVAILABLE";/* This flex bit is used to determine whether Initial Set up application available or not */
1182;"BARRED_DIAL_AVAILABLE";/* This flex bit is used to determine if feature BDN (Barred Dial) is available */
1183;"MSGS_AVAILABLE";/* This flex bit is used to determine whether Messages application is available or not */
1184;"CAR_SETTING_AVAILABLE";/* This flex bit is used to determine whether Car Setting application is available or not. */
1185;"HEADSET_AVAILABLE";/* This flex bit is used to determine whether HeadSet application is available or not */
1186;"INCOMING_CALL_AVAILABLE";/* This flex bit is used to determine whether Incoming Call application is available or not */
1187;"IN_CALL_SETUP_AVAILABLE"/* This flex bit is used to determine whether In Call Setup application is available or not */
1188;"PHBK_AVAILABLE";/* This flex bit is used to determine whether PhoneBook application is available or not */
1189;"SC_AVAILABLE";/* This flex bit is used to determine whether ShortCuts application is available or not */
1190;"NETWORKJINGLE_MENU_AVAILABLE";/* This flex bit is used to determine if the Network Jingle feature is available. When this feature is enable and the network jingle option is ON, then Jingle tone will be played when camped on to particular network. */
1191;"SILENT_MODE_HASH_KEY_AVAILABLE";/* This flex bit is used to determine if the silent mode hash key is available Only when the flex bit SILENT_MODE_HASH_KEY_AVAILABLE is set to on, the value of SILENT_VIBRATE_MODE_HASH_KEY takes effect. */
1192;"DISABLE_LINE1_LINE2_INFO_AVAILABLE";/* New feature required to disable display of line1/ line2 info for hutch. If set to off (default), Line 1, Line 2 information will be displayed in InCall dialog.If set to on, Line 1, Line 2 information will not be displayed in InCall dialog */
1193;"SHORTCUT_COLOR_AVAILABLE"; This Feature ID is to check whether MENU + 0 + C + O + L + O + R + S (short cut to Color Style) is available or not. This Feature ID will be turned ON even when the SKINS are needed. If the SKINS are turned ON, then this feature ID will not be reffered. But if the SKINS are turned OFF, then this feature IDs are required.
1194;"WEB_HISTORY_AVAILABLE";"WebAcces > Some missing icons on few flexes (1 show icons, 0 hide them)"
1195;"MULTICALL_AVAILABLE"; This flex bit is used to determine whether active call app is available or not in main menu
1196;"CUSTOMER_POWERDOWN_TONE_AVAILABLE";/* GSM has a state ID POWER_DOWN_TONE and will continue to use same. This feature id is used to play powerdown tone while customer greeting is been displayed. */
1197;"MOTOROLA_POWERDOWN_TONE_AVAILABLE";/* GSM has a state ID POWER_DOWN_TONE and will continue to use same. This feature id is used to play powerdown tone while Motorola greeting is been displayed. */
1198;"WEB_SHORTCUTS_AVAILABLE";/* This flex bit is used to determine whether Web ShortCuts application is available or not. */
1199;"MSLE_AVAILABLE"; This Feature is used to check whether the Lights Main Menu item needs to be shown or not. This is new feature for 3G only.
1200;"SYNCMLDM_AUTOMATIC_SESSIONS_AVAILABLE"; This feature id is used to verify whether the SyncML notification received by the handset should be processed without user intervention (automatically)
1201;"SYNCMLDM_DYNAMIC_URL_AVAILABLE";/* This feature id is used to verify whether the Dynamic URL feature is turned on or not. The Dynamic URL feature allows the operator to update invisible net links on the handset OTA using SyncML DM */
1202;"BROWSER_CLEANUP_EXP_PUSH_AVAILABLE";/* MRS11101 requires Browser to delete all expired push messages from the browser push database. This request is specific to cingular. This bit needs to be turned ON for cingular and turned off for all other customers. */
1203;"PTC_AVAILABLE";/* For 3G only, This feature id is used to enable PTC specific UI features in other synergy applications like phonebook, MMA and ring vib alert application. All these UI features are enabled if value of this feature id is ON */
1204;"CAMERA_ORIENTATION_AVAILABLE"; For GSM, The hardware team can mount the camera in a variety of ways on the product. This field will allow the software to be programmed based on the hardware configuration. If the available flex bit is not present, the software will assume the camera is oriented with the imager right side up. If the flex bit is set to 1, then the orientation should be determined by the DL_DB_FEATURE_ID_CAMERA_ORIENTATION feature ID.
1205;"SYNCML_DM_BOOTSTRAP_USERPIN_AVAILABLE";/* For GSM, FeatureID to check if USERPIN authentication is supported or not during SyncML-DM bootstrap process */
1206;"BARRED_DIAL_LOCK_AVAILABLE";/* For 3G only this flex bit is used to determine if feature BDN (Barred Dial) can be locked or not */
1207;"H3G_PROMPTS_AVAILABLE";/* For 3G only H3G requires Talon to rename 'Datebook' to 'Calendar' and 'Services' to 'Facilities' for both menu and soft key prompts. */
1208;"PHBK_CATEGORY_AVAILABLE"; For 3G only, This flex bit is used to determine if Phonebook Groups feature is availale.
1209;"PHONEBOOK_DELETE_ALL_AVAILABLE";/* Indicate whether Delete All Phonebook Entries feature is available */
1210;"PHONEBOOK_VIDEO_CALL_TYPE_AVAILABLE";/* For 3G only, Indicate whether Video call type is available */
1212;"FOTA_AUTOMATIC_SESSION_AVAILABLE";/* This feature id is used to verify whether the SyncML FOTA download should be processed without user intervention (automatically) */
1213;"ZIP_CODE_TAP_AVAILABLE"; It contains the value OFF or ON depends on which code will be executed.
1214;"BROWSER_RESUME_DOWNLOAD_AVAILABLE";/* This feature-id determines whether browser supports resuming a download or not. */
1215;"MAINMENU_BULLET_LIST_AVAILABLE";/* This Feature is used to check whether main menu list items should be preceded with a bullet than with 15X15 icons or not.*/
1216;"OHS_INBOX_AND_EDITOR_SC_AVAILABLE";/* A flex bit must be created to enable or disable the functionality provided by feature 11175.*/
1217;"KJAVA_WIRELESS_MESSAGING_AVAILABLE";/* For GSM, feature 8472 provides the API for kJava applications to create, send, receive MMS messages (as well as SMS and CBS). The feature 8472 implements JSR205 (Wireless Messaging API (WMA) ver. 1.0.2). */
1218;"MMS_EXT_NOTIF_AVAILABLE";/* For GSM, the display of the text body from notification shall be flex controlled. */
1219;"MMS_NOTIF_REJECT_CSM_AVAILABLE"; For GSM, the 'reject' option for notification messages shall be flex controlled.
1220;"MMS_STORE_FULL_BODY_NOTIF_AS_SMIL_AVAILABLE";/* The feature Id is used to control the format of the message in which a full body will be stored. If flexed ON the format will be a smil message else it will be letter message. */
1221;"SHOW_EXCLUSIVE_HOMEKEYS_APP_AVAILABLE";/* Feature ID to check whether to show the EXCLUSIVE Home Keys Application in the Home Key List or not. */
1222;"256K_COLOR_AVAILABLE";/* To enable UIS allocating YUV surface with ATI, and receive YUV data from MME, resize YUV, etc. When the feature availability is turned off, UIS should request for RGB data from MME, and allocating RGB surface with ATI. When the feature is turned on, we are all using YUV. */
1223;"3DAUDIO_INITIALSETUP_AVAILABLE";/* Spatial Realtime Audio Spatialization for all audio stereo Headsets shall enable spatialized audio as well as sound field control. Spatializing stereo audio preserves left and right separation, to make the sound appear to come from outside the listeners head, while sound field control allows the user to determine how spatialized the audio is. */
1224;"MMC_BASS_BOOST_AVAILABLE"; Bass Boost is a type of circuitry that compensates for weak low frequency response by actively increasing the output of low frequencies. Bass boost is usually centered at around 40 Hz and is expressed in decibels (ex. 12dB @ 40 Hz). This availability bit will indicate that bass boost feature is ON or not. hase 2). This ID should set to On only if DSP supports real time sound stream modifications.
1225;"GET_NUMBER_WITH_ASTERISK_AVAILABLE";/* This feature enables/disables the asterisk symbol parsing from embedded numbers in messages. */
1226;"MMS_DELETE_UNHANDLED_JAVA_MMS_MSGS_AVAILABLE";/* this feature-id is required to determine the handling of Unknown/Unhandled MMS messages. If a downloaded MMS has unknown routing parameters such as the application-id and from-addresses, the message will not be routed to the Java client. Handling this message can be controlled by this feature-id. */
1227;"TELEFONICA_SIM_CARD_DELAY_AVAILABLE";/* Controls delay need to avoid concurrence while reading a message stored in the sim card.(only for GSM products that use CAAP044) */
1228;"CLI_ANALOG_CLOCK_AVAILABLE"; This is the feature id to make the Analog clock feature ON/OFF in Malta CLI.
1229;"VOICE_MESSAGE_AVAILABLE";/* For GSM, this feature Id will support the composition and viewing of Voice MMS Message */
1230;"SECONDARY_CONTEXT_AVAILABLE";/* Secondary PDP context shares the same IP address as the primary PDP context but uses different data channel for data transmission. */
1231;"CMCC_SETTING_LOCK_AVAILABLE";/* The flex bit is used to determine if CMCC Setting Lock application is available. */
1232;"DELAY_ANSWER_AVAILABLE"; This feature will allow the user to delay physically answering the incoming phone call, while still establishing communication with the incoming caller so that the phone call does not go to voice mail.
1233;"SMS_SELECT_STORAGE_AVAILABLE"; This feature is to provide user a choice via settings where the user can choose to store the SMS messages in SIM/USIM or Phone. This feature id is being requested because the user will be able to modify the state of the feature, and the state selected will be stored in this feature id.
1234;"RTP_VAD_AVAILABLE"; This is needed to enable/disable VAD. VAD stands for voice activity detection. If this feature is enabled, then DSP encodes the input signal at a lower average rate by taking speech inactivity into account.
1235;"RTP_COLLISION_CHECK_AVAILABLE";/* This is needed to exclude/include SSRC collision check. SSRC is a field in RTP packet of length 32 bits. This field identifies the source that is generating the RTP packets for this session. */
1236;"FULLSCREEN_PV_TRANSPARENCY_AVAILABLE";/* This Feature ID need for Full Screen Picture Viewer features. Using this Feature ID we may to turn on/off transparency drawing controls inside Full Screen Picture Viewer */
1237;"USB_CHARGE_SETTING_AVAILABLE"; This feature will allow user to select if charging through USB Host is allowed.
1238;"DRM_PREVIEW_NOTIFICATION_AVAILABLE";/* This feature will be used to control appearance of 'Rights consuming confirmation' dialog in the case of downloading a DRM protected content.*/
1239;"MMC_EXTERNAL_PLAYER_AVAILABLE";/* This bit will indicate that an external player is present and the audio player should defeature itself so it will not compete with the 3rd party audio player */
1240;"SIMTK_TELEFONICA_LOC_STATUS_EVENT_AVAILABLE";/* If the feature id is flexed OFF, then SIM TK will handle MNMM_STK_LOCI_IND_ID. If the feature id is flexed ON , then SIM TK will handle MNMM_NREG_IND_ID / MNMM_REG_IND_ID. */
1241;"REMOVE_SS_CNF_TRANSIENT_NOTICE_AVAILABLE";/* As per PCS-13577 the requirement is to remove the transient confirmation notices of successful call related supplementary service operations to make In-Call user Interface more consistent. For this, a feature id is required to have the option of feature available or not. */
1242;"MMC_VIDEO_CAPTURE_PREVIEW_AVAILABLE";/* This flex bit is used to indicate whether the user is able to preview a captured video before storing or sending it. */
1243;"VARIABLE_TAP_TIME_AVAILABLE"; This flex bit is used to determine if "Reduced time for cursor movement in TAP" feature is available
1244;"MMC_VP_VIEW_BY_MODE_AVAILABLE"; This feature allows the users to see a thumbnail image that represents their videos in a Video summary view; users have to select CSM from video selection list -> video setup -> View by .
1245;"MMC_VP_THUMB_FOR_VIDEO_RINGERID_AVAILABLE";/* This feature allow the users to see a thumbnail image that represents their videos in a Video summary view when you are associating a video ringer id with a phonebook entry */
1246;"MMC_PV_CAMERA_FOCUS_BRACKET_AVAILABLE"; This setting allows the user to switch on/off the actual displaying of the brackets
1247;"MEDIA_EDITOR_AVAILABLE"; This feature allows the user to edit image/video/audio files (initially images only will be supported).
1248;"MEDIA_EDITOR_IMAGE_CROP_AVAILABLE"; The Media Editor supports the "Crop" editing operation
1249;"MEDIA_EDITOR_IMAGE_RESIZE_AVAILABLE"; /* The Media Editor supports the "Resize" editing operation on images */
1250;"MEDIA_EDITOR_IMAGE_RED_EYE_REMOVAL_AUTO_AVAILABLE"; /* The Media Editor supports the automatic "Red-eye removal" editing operation
1251;"MEDIA_EDITOR_IMAGE_RED_EYE_REMOVAL_MANUAL_AVAILABLE"; /* The Media Editor supports the manual "Red-eye removal" editing operation on images. */
1252;"MEDIA_EDITOR_IMAGE_DISTORT_BLUR_AVAILABLE"; /* The Media Editor supports the "Blur" distortion editing operation on images. */
1253;"MEDIA_EDITOR_IMAGE_DISTORT_INFLATE_AVAILABLE"; /* The Media Editor supports the "Inflate" distortion editing operation on images. */
1254;"MEDIA_EDITOR_IMAGE_DISTORT_PINCH_AVAILABLE"; /* The Media Editor supports the "Pinch" distortion editing operation on images. */
1255;"MEDIA_EDITOR_IMAGE_DISTORT_WHIRL_AVAILABLE"; /* The Media Editor supports the "Whirl" distortion editing operation on images. */
1256;"MEDIA_EDITOR_IMAGE_DISTORT_OIL_PAINTING_AVAILABLE"; /* The Media Editor supports the "Oil Painting" distortion editing operation on images. */
1257;"MEDIA_EDITOR_IMAGE_ADD_GRAPHIC_AVAILABLE"; /* The Media Editor supports overlying graphics ontop of images. */
1258;"MEDIA_EDITOR_IMAGE_ADD_TEXT_AVAILABLE"; /* The Media Editor supports overlying text ontop of images. */
1259;"MEDIA_EDITOR_IMAGE_ADD_SOUND_AVAILABLE"; /* The Media Editor supports adding a sound to an image. */
1260;"MEDIA_EDITOR_IMAGE_COLOR_CORRECT_AVAILABLE"; /* The Media Editor supports the "Color Correct" editing operation on images. */
1261;"MEDIA_EDITOR_IMAGE_AUTO_ENHANCEMENT_AVAILABLE"; /* The Media Editor supports the "Auto Enhancement" editing operation on images. */
1262;"MEDIA_EDITOR_IMAGE_GAMMA_CORRECT_AVAILABLE"; /* The Media Editor supports the "Gamma Correct" editing operation on images. */
1263;"MEDIA_EDITOR_IMAGE_DISTORTION_CORRECT_AVAILABLE"; /* The Media Editor supports the "Distortion Correct" editing operation on images. */
1264;"MEDIA_EDITOR_IMAGE_VIGNETTING_AVAILABLE"; /* The Media Editor supports the "Vignetting" editing operation on images. (The word "vignetting" is used to indicate a darkening of the image corners in a photographic image). */
1265;"MEDIA_EDITOR_IMAGE_BRIGHTNESS_AVAILABLE"; /* The Media Editor supports the "Brightness" editing operation on images.*/
1266;"MEDIA_EDITOR_IMAGE_CONTRAST_AVAILABLE"; /* The Media Editor supports the "Contrast" editing operation on images. */
1267;"MEDIA_EDITOR_IMAGE_BLUR_SHARPEN_AVAILABLE"; /* The Media Editor supports the "Blur/Sharpen" editing operation on images. */
1268;"MEDIA_EDITOR_IMAGE_MIRROR_AVAILABLE"; /* The Media Editor supports the "Mirror" editing operation on images. */
1269;"MEDIA_EDITOR_IMAGE_ROTATE_AVAILABLE"; /* The Media Editor supports the "Rotate" editing operation on images. */
1270;"MEDIA_EDITOR_IMAGE_BORDERS_AVAILABLE"; /* The Media Editor supports the addition of borders to images. */
1271;"MEDIA_EDITOR_IMAGE_STYLES_AVAILABLE"; /* The Media Editor supports changing the style of an image (e.g. "Color" / "Black and White" / "Sepia" etc...) */
1272;"MEDIA_EDITOR_ONSCREEN_TRANSIENT_AVAILABLE"; /* If this flex bit is on, the Media Editor will ,
show a transient notice on OnScreen editing features if they take more than 2 seconds to complete. The notice will contain "Applying edit" in the title, and the current editing operation in the body. A progress bar will also be displayed. */
1273;"FULL_SCREEN_PV_AVAILABLE"; /* This flex bit is used to indicate whether the user is
able to view pictures in fullscreen mode. */
1274;"DISABLE_STYLE_CHANGE_ON_EXTERNAL_POWER_AVAILABLE"; /* Currently, the active ringstyle
changes from vibrate or vibe&ring to loud when external power (charger) is connected and vice-versa when
it is disconnected. This behaviour needs to be disabled for all Vodafone products. That is, connecting/disconnecting charger will have no effect on the active ring style. For this we need a new feature
id which will be flexed ON if disabling style change is required. Thus this flexbit will be ON for all Vodafone products. */
1275;"HOTSWAP_TRANSP_STORAGE_DESCOPED_AVAILABLE"; /* Only for R4.51.3 Malta_VF phone. In this
phone there isn't feature 12604 (which is only for 3G phones). These two features must not coexists in the same phone. For this reason this Feature ID is necessary. This feature is a descoped version of 12604. It
allows the user to view all the files stored both in the internal andexternal memory at the same time (Transparent Storage) and to insert/remove the external card while scrolling trough the list of media files (Hotswap capability). */
1276;"UC_AVAILABLE"; /* Single composer to create SMS and MMS messages */
1277;"UC_SMS_TO_MULTIPLE_BECOMES_MMS_AVAILABLE"; /* If a SMS has multiple destination addresses and State is OFF, it will be handled as SMS. If State is ON, the message will become a MMS message. */
1278;"UC_SHOW_MSG_TYPE_ICONS_AVAILABLE"; /* Show the text icon that indicates the msg type (SMS, EMS or MMS) in the messaging windows. */
1279;"UC_TRANSITION_CONFIRMATION_AVAILABLE"; /* When the message transitions between SMS <==> MMS:Notify the user via a pop-up message with information that the message has changed from SMS to MMS or vice-versa. */
1280;"UC_SIZE_INDICATOR_AVAILABLE"; /* Character counter (or Kb counter in case o MMS) shall be displayed or not. */
1281;"ENHANCED_LIST_SCROLLING_AVAILABLE"; /* The Enhanced List Scrolling Element enables the
user to more easily ascertain their
1282;"EMAIL_OTA_PROV_AVAILABLE";/* Enables/disables OTA Provisioning for Email Client as P2K feature */
1283;"SIMTK_REFRESH_NO_APP_STATE_CHECK_AVAILABLE";/* In the current implementation, whenever a REFRESH proactive command is issued by the SIM and SIM ToolKit App at that time happend to be buzy, then the action corresponding to this command did not take place. But if SIM is O2 then refresh action would take place no matter application was buzy or not. Since this feature is specific to O2, its defult value will be OFF */
1284;"MMC_CAPTURE_MENU_POSITION_AVAILABLE"; This availability bit is used to indicate whether the capture menu position is flexible (enabled) or fixed (disabled). This applies to the "New Picture" and "New Video" menu items, as well as the "New Audio" item once audio capture is implemented.
1285;"MMC_SEND_AND_STORE_OPTION_AVAILABLE";/* This feature is used for changing prompts of the right softkey and the title of store option menu for Picture Capture and Video Capture applications. */
1286;"OMADRM_EXTEND_ACTIVATION_CONFIRMATION_AVAILABLE";/* This flex bit should control of displaying 'Extend Activation' confirmation when user want to extend license for seperate delivery OMA DRM (Open Mobile Alliance Digital Rights Management) file. */
1287;"OMADRM_SECURE_TIME_AVAILABLE";/* This flex bit should indicate availability of secure time source for OMA DRM (Digital Rights Management). This bit should have same value as DL_DB_FEATURE_ID_NITZ_AVAILABLE bit. */
1288;"USE_NON_FILESYSTEM_TONES_AVAILABLE";/* The DSP chip on the San2rini phone, on which the PTT is supported, currently can only play Non File system tones (CTG+Vibrate) for PTT Alert. So, the PTT "Ring Styles" option on the phone should show only these Ring Styles to the User for PTT. This Feature ID is used to decide whether to display only the Non File System Tones or to use all the ring tones for PTT Alert settings. */
1289;"AIRPLANE_MODE_AVAILABLE";"Settings > Airplane Mode (1 on, 0 off)"
1290;"AIRPLANE_MODE_PROMPT_ON_POWERUP_AVAILABLE";"Settings > Airplane Mode > Prompt At Startup (1 on, 0 off)"
1291;"PHBK_SEND_CONTACT_AVAILABLE";/* This feature is available in 3G only. This is required for GSM Malta. About this feature, when viewing a contact from the Phonebook, the options list must include Send Contact. By selecting this option the user is presented with a dropdown list of text message, multimedia message and email. The contact is to be included in the message body. */
1292;"VIB_THEN_RING_AVAILABLE"; As per MRS 8219 a new feature for "Simultaneous Ring and Vibrate" was introduced in the "ring styles" application. The existing feature "Vibrate then Ring" is available on GSM, but not supported on 3G and needs flex control to turn it off both on GSM and 3G.
1293;"CMCC_MYFAVORITE_AVAILABLE";/* "Myfavorite" is the new name for the existing "Media Centre" per CMCC requirement 12895, and a new folder "MMS Card" will also be created under "Myfavorite", this flex bit is used to determine if this feature is available. */
1294;"CMCC_LUNARCALENDAR_AVAILABLE";/* Per CMCC requirement 12899, the Chinese Lunar Calendar will be show together with the existing English Calendar, and the user can On/Off it manually by menu item. This flex bit is used to determine if the Lunar Calendar feature is available. */
1295;"CMCC_CUSTOMIZATION_AVAILABLE";/* Per CMCC requirement 12893, there are several carrier specific Menu Bundles in the Main Menu. This flex bit is used to determine if the CMCC Customization feature is available. */
1296;"WVIM_MC_AVAILABLE"; If the WVIM Messenger item will be available in the Message Center List.
1297;"VF_NONDRM_ALERT_BLK_AVAILABLE";/* 1) The following files shall not be able to be set as alert tones. 1) Non-OMA DRM files containing MP3, AAC/AAC+/AAC+e content. 2) OMA DRM count constrained files containing MP3, AAC/AAC+/AAC+e content. When bit is 1, the feature is available, then 1 and 2 above (like mp3 / aac) will NOT be available as rington; when 0, the feature is off, mp3 / aac will be available as ringtone. */
1298;"EMAIL_SPAM_FILTER_AVAILABLE"; Enables/disables SPAM filter for email messages as P2K feature
1299;"CMCC_MMSCARDS_AVAILABLE";/* "Myfavorite" is the new name for the existing "Media Centre" per CMCC requirement 12895, and a new folder "MMS Card" will also be created under "Myfavorite", this flex bit is used to determine if MMS card application is available */
1300;"SINGLELINE_QUICKVIEW_NOT_REMOVED_BY_END_AVAILABLE";/* This feature ID will enable or disable feature 13163 in Messaging Application. When this feature is ON, single line quickview messages won't be deleted from idle screen by pressing the END key. */
1301;"MMC_PV_VIEW_BY_MODE_AVAILABLE"; /* This feature allows the users to see a thumbnail image that represents their pictures in a Picture summary view; users have to select CSM from picture viewer selection list -> Picture setup -> View by . */
1302;"STOP_BG_AUDIO_AVAILABLE";/* This feature id will be set in the flex files depending on the what kind of functionality the customer wants. This will be flexed as 1 if the customer wants the background audio to stop always when the incoming ringer is set to silent of vibrate for calls or messages. This will be flexed as 0 if the customer wants the background audio to always continue play when the incoming ringer is set to silent of vibrate for calls or messages. */
1303;"MMC_VP_FULLSCREEN_AVAILABLE";/* Flex bit which determines whether full screen video playback is available or not. */
1304;"MMC_VP_ZOOM_AVAILABLE";/* Flex bit which determines whether zoom in portrait video playback is available or
1305;"PTT_AUTOMATIC_PRESENCE_AVAILABLE";/* This feature id determines if automatic presence feature is available or not. */
1306;"PTT_MANUAL_PRESENCE_ON_PHONE_AVAILABLE";/* This feature id determines if On the Phone presence setting is available or not. */
1307;"PTT_MANUAL_PRESENCE_ON_DATA_AVAILABLE";/* This feature id determines if On a data session presence setting is available or not. */
1308;"PTT_MANUAL_PRESENCE_OUTOF_OFFICE_AVAILABLE";/* This feature id determines if Out of Office presence setting is available or not. */
1319;"PTT_MANUAL_PRESENCE_DONOT_DISTURB_AVAILABLE";/* This feature id determines if do not disturb presence setting is available or not. */
1310;"PTT_MANUAL_PRESENCE_BUSY_AVAILABLE";/* This feature id determines if Busy presence setting is available or not.*/
1311;"PTT_PRESENCE_ON_PHONE_ISDND_AVAILABLE";/* This feature id determines if presence setting On the phone is flexed to be a DND setting. A presence setting flexed to be DND (Do Not Disturb) setting shall behave as a "Do Not Disturb" presence state. */
1312;"PTT_PRESENCE_ON_DATA_ISDND_AVAILABLE";/* This feature id determines if On Data presence setting is flexed to be a DND setting.A presence setting flexed to be DND (Do Not Disturb) setting shall behave as a "Do Not Disturb" presence state. */
1313;"PTT_PRESENCE_OUTOF_OFFICE_ISDND_AVAILABLE";/* This feature id determines if out of office presence setting is flexed to be a DND setting.A presence setting flexed to be DND (Do Not Disturb) setting shall behave as a "Do Not Disturb" presence state */
1314;"PTT_PRESENCE_BUSY_ISDND_AVAILABLE";/* This feature id determines if Busy presence setting is flexed to be a DND setting.A presence setting flexed to be DND (Do Not Disturb) setting shall behave as a "Do Not Disturb" presence state. */
1315;"EMAIL_INET_AVAILABLE";/* Enables/disables iNet items in Email CSM as P2K feature. */
1316;"POPUP_WIDGETS_AVAILABLE";/* This flex bit is used to determine the editor mode when the Alternates Line in iTAP entry method must be replaced by Popup List and Popup Matrix UI elements for "Advanced Predictive Text Input - iTAP 6.2" feature. */
1317;"CMCC_HOTMESSAGE_AVAILABLE";/* This flex bit is used to determine if "Hot Messages" folder is available or not as described in the TRS12896. */
1318;"JAPAN_EMAIL_FORMAT_SUPPORT_AVAILABLE";/* This feature Id will support storing of special format email address(es) for Japan - Vodafone Japan request */
1319;"BROWSER_DD_ALL_MIME_VALID_AVAILABLE";/* Vodafone requires that if a DD file( Download descriptor, which is describes the type and size of the content) has more than one and upto 3 mime types, that all the mime types be checked for acceptabily. If any of the mime type is not supported by the phone then download should be aborted immediately. */
1320;"BROWSER_CHANGE_ACCESS_POINT_PRIORITY_AVAILABLE";/* This feature-id determines whether user has the option of changing access point priority when in UMA mode. */
1321;"CONTACT_ADDRESS_AVAILABLE";/* This feature id will determine if the postal address is supported by the phonebook or not.*/
1322;"WIZARD_DIALOG_AVAILABLE";/* Help Wizard Dialog on Power up feature available. The availability bit is used to check if the feature is ON or OFF. So this will be flexible. */
1323;"PTT_VOICE_CALL_INVOCATION_AVAILABLE";/* This feature indicates if a Voice call invocation shall be made available to the user when a PTT call fails. */
1324;"ONE_CLICK_ACCESS_MSG_EDITOR_AVAILABLE";/* This feature ID will be used to determine the availability (ON or OFF) of the feature 1-Click Access to Message Editor (TRS 9797 / SUIS 9797), which permits the user to access the Message Editor for creating a SMS/EMS/MMS/Email directly from Idle screen by pressing Message Editor Homekey or Softkey.*/
1325;"CMCC_MSG_SORTING_AVAILABLE";/* Enable or disable the ability of sort the messages in INBOX folder by type */
1326;"VOICEMAIL_40_DIGITS_AVAILABLE";/* Enable/disable Voicemail 40 digits support */
1327;"VST_VOICE_ENABLED_PTT_AVAILABLE";/* This feature id will communicate if the PTT Voice Enabled Feature is available. This is added functionality to the existing VST feature and will be a customer specific request to enable or disable it. */
1328;"MMS_PHONEBOOK_NAME_REPLACEMENT_AVAILABLE";/* When we are viewing details screen in the message viewer the phone number(s)/email address(es)in the To/Cc/Bcc fields are sent to the phonebook. If any of the phone number(s) / email address(es) is present in some contact the name of the contact is returned otherwise the phone number(s) / email address(es) is returned as it is in the response from phonebook.The response string from the phone book is displayed as To/Cc/Bcc fields in the details screen. */
1329;"MMS_H3G_LAUNCH_URL_AVAILABLE";/* While reading a message in smil viewer, if any Url is present in the message, the RSK should display "Go To Link". If there is only single URL is present ,pressing "Go To Link" should launch browser directly. And if there are multiple URLs then pressing "Go To Link" should take user to a scrollable list, where RSK should be SELECT and LSK should be CANCEL. */
1330;"BROWSER_REMOVE_INTERMEDIATE_CSS_RELAYOUT_AVAILABLE";/* For 3G only. This feature allows relayouting of the document to be deferred until allCSS and image fetcheare completed. Currently browser does a relayout when all the CSS is fecthed and once again when all the images are fetched. Now if this feature ID is ON then browser will not do the relayout on getting all the css.The relayout will happen when all the images and css are fetched. */
1331;"PICTBRIDGE_AVAILABLE";/* Whether or not the PictBridge printing feature is available. The PictBridge feature allows for direct image printing over USB (no personal computer needed) with PictBridge compliant printers. */
1332;"MMC_PV_FEATURE_PICTURE_EXIF_AVAILABLE";/* This feature turn OF or ON thumbnail generation support. */
1333;"DPOF_AVAILABLE";/* Whether or not the DPOF (Digital Print Order Format) printing feature is available. This feature allows users to print images off of their memory cards after inserting them into DPOF compliant printers. The printing parameters are stored on the memory card along with the images to print. */
1334;"NOTEPAD_MENU_ITEM_AVAILABLE";/* Notepad is a menu item shown in Recent call main menu. Now vodafone Spaine dont want this feature because of some security concerns. This menu item has to be made flexible in order to flex it off for VF spain. */
1335;"MMC_PROGRESSIVE_DOWNLOAD_AVAILABLE";/* This bit will indicate if the progressive download
feature is available or not. Progressive Download allows the user to view a multimedia file (video/audio) as it is being downloaded. */
1336;"MMC_PROGRESSIVE_DOWNLOAD_STORE_AVAILABLE";/* This bit will indicate whether the operator would like the mobile phone to offer the ser the option to store the progressively downloaded file to the
phone. */
1337;"ANM_AVAILABLE";/* This is for the Automatic Noise Masking (ANM) feature in a call which is an advancement to the currently existing Automatic Voulem Control ( AVC ). This feature id will be set in the flex files depending on the what kind of algorithm the phone can support for noise control. This will be flexed
as 1 if the new ANM support is available. This will be flexed as 0 if old AVC feature is supported. */

1338;"MSG_SPAM_FILTER_AVAILABLE";/* Spam Messaging Filter will be a flexible feature. The feature availability will be controled by the carrier. * When set is on, upon receiving a new message the terminal will
examine the originating number of the received message. If this number matches one stored in the Phonebook, then current behavior will be followed. If the number does not match one stored in the Phonebook or is unavailable, the message will be marked as SPAM. * When set to Off, current behavior will
be followed. */
1339;"MSG_SPAM_NOTIFICATION_AVAILABLE";/* The decision of notifying or not the user of new spam messages will be flexible, and controlled by the carrier. The new Feature Id will store this setting.* When Available, upon receiving a new message identified as spam, a new message notification dialog will be shown.* When Unavailable, upon receibing a new message identified as spam, the new message icon in the status bar will be displayed, the new message dialog will not be displayed and the alert tone will not be played. */
1340;"SYNCMLDM_POC_AVAILABLE";/* The OTA-P PoC feature adds the capability to provision client-server
applications via the OMA Device Management (DM) protocol.If this flex bit is disabled or If the PoC application has been flexed off (i.e PTT_AVAILABLE is flexed off) at the factory, the OMA DM service SHALL
return error message. If this flex bit is enabled and If the PoC application is subsequently flexed on (OTA
Flex or Device Flex), regardless whether PTT is turned on or off, the OMA DM service SHALL provide provisioning service to the PoC application. */
1341;"CB_DISPLAY_BACKLIGHT_KEEP_OFF_AVAILABLE";/* This feature ID will enable or disable feature
9675 in Messaging Application. When this feature is ON, display backlight won't be turned on when a CB
message arrives and the QuickView storage and channel options won't appear in the Setup. */
1342;"RIGHTS_OBJECTS_ALERTS_AVAILABLE";/* This flex bit is used to determine if feature "Rights Objects Time Based Alert" (12072) not available on the phone. */
1343;"OMADRM_LICENSE_AUTO_DELETE_AVAILABLE";/* This flex bit is used to determine if 'auto delete' functionality in feature 11050 is available or not available on the phone. */
1344;"UC_MANUAL_MSG_CHANGE_AVAILABLE";/* This flex bit is used to determine if the manual mode to
change message type from SMS to MMS and vice versa is supported in Unified Composer for operators who
are not still ready for Unified Composing for SMS and MMS. When the value is ON, the user will be shown menu option to change the message type to MMS from SMS and vice versa (if the message still qualifies to be SMS). When the value is OFF, the automatic mechanism to determine messge type shall be used. */
1345;"BROWSER_PROGRESSIVE_DWNLD_VIA_OMA_DWNLD_AVAILABLE";/* The master feature-id for this
feature: MMC_PROGRESSIVE_DOWNLOAD_AVAILABLE is to determine whether handset supports

progressive download/playing while downloading/etc, where as this feature-id is to determine whether
browser supports progressive download through OMA download (download descriptor) mechanism or not.
This feature-id is required to avoid billing problems operators may face. Behavior: OFF – handset allows
user to download the file, but does not allow viewing its content while downloading. ON – handset allows user to download the file and also allows viewing its content while downloading. In both cases, handset allows user to download the file, but depends on the option user may get to see its content. */
1346;"THEMES_MINI_PREVIEW_AVAILABLE";/* This feature id will be used to enable/disable theme scrolling
mini-preview in feature 12863 - If value of this feature id is ON then theme minipreview of feature 12863 is enabled. */
1347;"THEME_INSTALLED_COMPONENTS_VISIBLE_AVAILABLE";/* This feature id will be used to decide if theme components shall be installed to their correspondent visible or hidden location: - If the feature is ON
then theme components will be installed to phone visible location. - if the feature is set to OFF then theme
components will be installed to phone hidden location. */
1348;"PERS_DATESETTINGS_AVAILABLE";/* At present Date is always displayed on Idle Screen. There is no option to the phone user to Hide/Show the date on Idle screen. This feature will allow the phone user to Hide/Show the Date on Idle Screen. */
1349;"MMC_AUDIO_CAPTURE_AVAILABLE";/* Determines whether the ”Update Voice Memo to Generic Audio Capture” feature (commonly known as ”Audio Capture”) is available. When enabled, this feature replaces the voice notes application. In such a case, the voice notes app will be either compiled off or flexed off, depending on the customer's requirements.*/
1350;"AUDIO_CAPTURE_QUALITY_AVAILABLE";/* Indicates whether the audio capture quality values are stored in the FeatureDatabase. If set to Off the application will default to the ”Medium” quality setting.*/
1351;"AUDIO_CAPTURE_LENGTH_AVAILABLE";/* Indicates whether the audio capture length values are stored in the Feature Database. If set to OFF then the application will default to the "MMS" capture length. */
1352;"AUDIO_CAPTURE_LENGTH_BASED_AVAILABLE";/* The capture length values can be specified in either 1) number of seconds, or 2) total captured file size. This bit indicates how to interpret the capture length values. A value of Off (0) means that the capture length values represent the total file size in bytes. A value of On (1) means the capture length values represent the total capture duration in seconds. */
1353;"KJAVA_SETTINGS_CORELET_AVAILABLE";/* Shows that Setup Home Screen is serviced by KJAVA CORElet or by native Personalize application. In case if it is ON then KJAVA Settings CORElet will be started on pressing "SETUP HOME" LSK, or from Setup Home item of Personalize application. If KJAVA is not ready to start CORElet at that time (bootup) - then a transient notice "Please Try Later" will be shown. If the feature is set to OFF then no notice will be shown, and old Native Setup Home Screen of Personalize app will be used */
1354;"EDGE_MM_CONCURRENCY_AVAILABLE";/* This feature is for managing the DSP limitation of the not being able to do EDGE (E-GPRS) and Multimedia simultaneously. With this change, we will be able to manage whether we can do FULL EDGE ( no PTT or Multimedia audio) or EDGE PTT( PTT call active) or GPRS ( Multimedia active )*/
1355;"NITZ_NETWORK_NAME_AVAILABLE";/* If this feature ID is flexed ON NITZ: Network Identity and Time Zone name updated via GMM or MM (stack) would be displayed, if flexed OFF, the network name
should not be displayed */
1356;"BROADCAST_LCC_SUPPORT_AVAILABLE";/* This flex bit is used to determine if Live!cast support is
available on the device. If BROADCAST_LCC_SUPPORT_AVAILABLE is set to ON then it means live cast is
available else live cast is not available on the device. This is not dependent on basic cell broadcast [GENERA
L_CELL_BROADCAST_AVAILABLE"; ] ; basic cell broadcast and live!Cast use different channel ranges on the cellbroadcast service */
1357;"BROADCAST_ADM_SUPPORT_AVAILABLE";/* This flex bit is used to determine if Alternate Delivery Mechanism is available in the device for receiving live!cast messages. If BROADCAST_ADM_SUPPORT_AVAILABLE"; is set to ON then it mean s that Alternate Delivery Mechanism is
available in the device for receiving livecast messages. This is not dependent on basic cell broadcast [GENERAL_CELL_BROADCAST_AVAILABLE"; ] ; the ADM protocol is a UDP based protocol and works independent of cellbraodcast */
1358;"PP_PHBK_WVIM_PRESENCE_AVAILABLE";/* PP_PHBK_WVIM_PRESENCE_AVAILABLE_OFF = 0
(WVIM presence will not be integrated with Phonebook App) PP_PHBK_WVIM_PRESENCE_AVAILABLE_ON
= 1 (WVIM presence will be integrated with Phonebook App) */
1359;"PP_PHBK_PTT_PRESENCE_AVAILABLE";/* PP_PHBK_PTT_PRESENCE_AVAILABLE_OFF = 0
(PTT presence will not be integrated with Phonebook App) "PP_PHBK_PTT_PRESENCE_AVAILABLE_ON = 1 (PTT presence will be integrated with Phonebook App) */
1360;"SYNCMLDM_WVIM_PROVISIONING_AVAILABLE";/* This feature Id will support that IM parameters are provisioned over the air by a DM server. Flex On: Enable the OTA IM provisioning. Carriers are able to change the IM parameters OTA. Flex Off: Do not enable the OTA IM provisioning. Carriers are not able to change the IM parameters OTA. */
1361;"OPPROF_AVAILABLE";/* This is an availibility bit for the availability of the Operational Profiling
feature. The Operational Profiling feature records the duration or the number of times a user action is performed(like connecting a usb cable, making a call, connecting a headset etc) in the file system of the
phone. This file can be retrieved at a later date for analysis. */
1362;"HZ_INFO_ON_EXTERNAL_DISPLAY_AVAILABLE";/* If this feature ID is flexed ON HZ (HomeZone) indicator (icon + tag) shall be put up on an (96 x80) external display, not otherwise. The status icon shall be placed in External Display Area 4 -'Roaming Indicator' within Roam_Status. The status tag shall be displayed
on Line 2 on the External Display in place of the date. */
1363;"EXCHG_ACTIVE_SYNC_AVAILABLE";/* This flex value is used to determine whether the Exchange Active Sync Feature is available on the handset. This feature provides OTA synchronization of Contacts, Calendar and Email with an Exchange 2003 Server.*/
1364;"SELECT_NETWORK_PROMPT_AVAILABLE";/* Confirm with user if he wants to select a new network before displaying the Available netowrks list after a background scan completes.*/
1365;"AUTOUPDATE_TIME_ONLY_AVAILABLE";/* This new feature id is used to check if the option of "Time only" should be displayed in the Initial Setup -> Time and Date -> Autoupdate list. */
1366;"MMS_MMBOX_SERVER_MAIL_LIST_AVAILABLE";/* Only needed for Compilation purpose. MMBox
offers the MT user a persistent message store on the network for incoming messages; new incoming messages on a MMS MT client, get automatically getstored on the MMBox server in the network. MMS-R then sends a notification message to the MT client which will be stored in the MMBox. MT User will be able to request list messages stored in the MMBox.*/
1367;"MMS_MMBOX_NETWORK_FORWARD_AVAILABLE";/* Only needed for Compilation purpose. MMBox offers the MT user to perform network based forwarding without downloading the entire MMS to the client. The message is forwarded directly off by the MMBox*/
1368;"WORLDCLOCK_AVAILABLE";/* This would decide the availability of the world clock */
1369;"WORLDCLOCK_LOCK_AVAILABLE";/* World Clock Application can be locked/unlocked */
1370;"BIND_RIGHTS_TO_USR_ID_AVAILABLE";/* This flex bit is used to determine if feature "Binding Rights Object to User Identity" (11680) is available or not available on the phone.*/
1371;"BIND_RIGHTS_TO_USR_ID_DIALOGS_AVAILABLE";/* This flex bit is used to determine if feature "Binding Rights Object to User Identity" (11680) Other IMSI Delete Dialogs are available or not availableon the phone per carrier request.*/
1372;"ONE_TIME_MATCH_PHBK_AVAILABLE";/* This feature Id will support match to phonebook only one time when msg is stored in database. Flex On: Enable match to phonebook one time when msg is stored in database. Flex Off: Keep the current rules for match to phonebook.*/
1373;"SORT_TIME_OLD_TO_NEW_AVAILABLE";/* This feature Id will support sort msgs by time , from old msg to new one. Flex On: Enable sort of msg by time from old to new one. Flex Off: Keep sort of msg by time from new to old one.*/
1374;"STICK_MODE_SORT_AVAILABLE";/* This feature Id will support stick mode for sort criteria when the
user leaves the folder Flex On: Enable stick mode for sort criteria when the user leaves the folder Flex Off: Reset the sort criteria to timestamp when the user leaves the folder */
1375;"SORT_BY_UNREAD_MSGS_AVAILABLE";/* This feature Id will support sort msg by unread mgs. Flex
On: Enable option to sort msg by unread mgs in msg folder Flex Off: Desable option to sort msg by unread mgs in msg folder The current sorting criteria will be saved in Message database and the preset will not be able by flex. */
1376;"SORT_BY_PRIORITY_AVAILABLE";/* This feature Id will support sort msg by priority. Flex On: Enable option to sort msg by priority mgs in msg folder Flex Off: Desable option to sort msg by priority mgs in msg folder The current sorting criteria will be saved in Message database and the preset will not be able by flex.*/
1377;"SORT_BY_ATTACH_AVAILABLE";/* This feature Id will support sort msg by attachment. Flex On: Enable option to sort msg by attachment mgs in msg folder Flex Off: Desable option to sort msg by attachment mgs in msg folder The current sorting criteria will be saved in Message database and the preset will not be able by flex */
1378;"SORT_BY_MSG_TYPE_AVAILABLE";/* This feature Id will support sort msg by typet. Flex On: Enable option to sort msg by type mgs in msg folder Flex Off: Desable option to sort msg by type mgs in msg folder The current sorting criteria will be saved in Message database and the preset will not be able by flex.*/
1379;"SORT_BY_ADDRESS_SUBJECT_AVAILABLE";/* This feature Id will support sort msg by address or subject. Flex On: Enable option to sort msg by address or subject in msg folder Flex Off: Desable option to sort msg by address or subject in msg folder The current sorting criteria will be saved in Message database and the preset will not be able by flex. */
1380;"ACCESS_POINT_PRIORITY_LOCK_AVAILABLE";/* This feature id indicates Access Point Priority Application Lock is Available or Not */
1381;"COMBINED_VIEW_AVAILABLE";/* This feature id will determine if the combined view feature is supported by phone book or not.*/
1382;"LOCK_APP_AVAILABLE";/* For common component compilation support only. This flex bit is used to
determine if pim lock feature is available. PIM lock feature will replace existing lock application. If this feature is available, security menu will have two items, lock application and lock application set up. lock
application set up will have a multiple selection editor picker in which user can select multiple applications to
be locked. Lock application will have a value on/off. If user selects lock app value on, all selected
applications in lock app set up menu will be locked.If PIM lock feature is not available, lock appplication and lock application set up menu items will not be displayed in security menu and user won't be able to lock/unlock any applications.*/
1383;"ZODIAC_AVAILABLE";/* The feature id:ZODIAC_AVAILABLE"; will be used to indicate whether the
zodiac is available in the phonebook or not. This feature id was required due to the TM CR: LIBff83570.

Following is the proposal given in the TM CR LIBff83750. Support for Zodiac field SHALL be felxible and
depend on regional usage of zodiac calendar based on months. Support of Zodiac calendar SHALL be limited to western Zodiac (monthly) Zodiac sign SHALL be automatically calculated based on birthday. If user has not populated birthday field, Zodiac SHALL not appear.So if any region does not follow the western zodiac
(such as the eastern countries), this zodiac should be flexed off. For example there is no support for yearly zodiac which is followed in the East. So for Chinese, the zodiac field should be flexed off. Due to this, this feature id ZODIAC_AVAILABLE is needed.*/
1384;"VFCAST_FEATURE_AVAILABLE";/* For common component compilation support only. This feature

provides support for the Vodafone Casting service - which allows the User to subscribe to content services

that are delivered over-the-air to the Phone out of peak usage hours eg:3- 7am (or any other time set by the Casting Server).This Feature ID is used to indicated that this feature is available or not.When this feature id bit is set then a new menu item will be available in Entertainment menu list as "Casting". This feature enables us to download Multipart/Mixed contents and store in the phone. */
1385;"VFCAST_LOCK_AVAILABLE";/* For common component compilation support only. This Feature ID is
used to indicates that VF casting will have locking feature is available or not. If this is set then a list element
will be available in the Lock Application list in Security app, where user can lock the casting application.
Once casting application is Locked the when user invokes Casting app the application will prompt to enter
unlock code. */
1386;"FASTTRACK_DOWNLOAD_AVAILABLE";/* This feature availability bit will be used by the FastTrack content handler (FTCH), media player (MMA) and browser download agent (BDA) to be able to support
FastTrack Download feature (feature number 8742). When flexed on, these components shall execute appropriate code to support the feature. When flexed off, FastTrack Download is not handled by the phone.*/

1387;"RESUME_PROGRESSIVE_DOWNLOAD_AVAILABLE";/* This feature availability bit will be used by FastTrack Content Handler to be able to determine whether resume download is supported or not for FastTrack Download (feature number 8742). When flexed on, the download agent shall execute appropriate
code to support the resuming of suspended or interrupted downloads. When flexed off, resuming of
suspended downloads is not supported. */

1388;"CONTINUOUS_PLAYBACK_BUFFERING_AVAILABLE";/* This feature availability bit will be used by the media player (MMA) for the progressive download feature. When flexed on, the media player shall buffer
downloaded content until enough content has been received such that the entire content can be rendered without emptying the buffer. When flexed off, downloaded content is rendered as soon as it is received (also known as fast start buffering). */
1389;"SYNCMLDM_DEFAULT_BROWSER_MMS_AVAILABLE";/* This feature id decides whether after adding a web session or MMS setup, whether the newly added setting(via SyncML DM) should be made as default.*/
1390;"MESSAGE_TYPE_SCREEN_FOR_UC_AVAILABLE";/* This feature id indicates feature 15285 is available or not on the phone. A Message Ttype screen (with options to create message) must be presented to the user if feature is ON. If it is off, the "create message" options in msg center will go direct to msg editing. */
1391;"MMC_INT_FULLSCREEN_AVAILABLE";/* For 3G only. Internal sensor fullscreen viewfinder capability for photo camera. Feature value 1 indicates internal sensor is mapped to full screen size. Value 0 indicates the sensor is mapped to partial screen size.*/
1392;"MMC_EXT_FULLSCREEN_AVAILABLE";/* For 3G only. External sensor fullscreen viewfinder capability for photo camera. Feature value 1 indicates external sensor is mapped to full screen size. Value 0 indicates the sensor is mapped to partial screen size.*/
1393;"MMS_NONASCII_SUPPORT_NOT_AVAILABLE";/* This feature id is required to determine whether media having Special characters ( Ascii value more than 0x80) in filenames could be sent according to latest WSP specs. If the feature id MMS_NONASCII_SUPPORT_NOT_AVAILABLE is set to 1, MMS is sent by removing the preceding double quote in filenames according to old WSP spec. If the feature id is set to 0 , MMS is sent with a double quote preceding filenames according to latest WSP specs. By default it should be OFF such that MMS is sent according to latest WSP specs. */
1394;"FORCE_STORAGE_TO_FLASH_AVAILABLE";/* FORCE_STORAGE_TO_FLASH_AVAILABLE=1 - force all media downloads to internal memory. Store camera and MMA list view settings in SEEM. =0 Disabled.*/

все эти биты уже выложил RekGRpth в теме Расшифровка Seem-файлов
в формате .csv - качайте и заменяйте его в папке P2KAE и все эти описания от моторола
всё работает на новых моделях, главное их сочетание.

Сообщение отредактировал Osta - 20.7.2007, 14:35

[Osta]

Это Моторола молодец и RekGRpth что записал

CODE

1395;"VOICEMSG_AUTORECORD_AVAILABLE";/* This flex bit would determine the availability of the Auto
start for recording while using MMA Audio capture app. Voice Message uses MMA Audio capture App (12971)
for recording voice notes. The MMA Audio capture app can be invoked either directly in "Auto start" mode or
in "Ready to record" mode. In "Auto Record" as soon as MMA Audio capture app will immediately start capturing the video without any explicit invocation from user. While in "Ready to record" mode the user will
have to explicitly press a soft key in order to start the recording. If the feature id is SET the MMA will be invoked in "Auto start" mode else in "Ready to record" mode

1396;"VOICEMSG_FWD_OPTIONAL_SUBJECT_AVAILABLE";/* This flex bit would determine whether an Optional subject dialog should appear while forwarding a voice message. This optional subject dialog will
allow the user to enter the subject even while forwarding a message. If this Optional subject dialog is not
there the old subject will be send with a prefix "Fwd: ". If the feature id is set, the Optional subject dialog should appear else not.

1397;"SIDEKEY_LOCK_AVAILABLE";/* For 3G only. The Side Keys Guard feature 13329 consists of adding
Side Keys Lock functionality to all clam shell phones. Presently clam shell phones lack keypad lock as well as side keys lock. When the Side Keys Lock is turned on, and the flip of the clam shells is closed, the side keys will be locked. This feature will not add keypad lock functionality to clam shell phones.Candy Bar phones possess the keypad lock functionality. The keypad lock, when enabled, locks the keypad as well as all side keys, in Candy Bar phones.

1398;"CHECK_WEB_SESSION_PLMN_CODES_AVAILABLE";/* This feature-id enables/disable TRS11405
feature: if there is no default websession is set on the phone, the phone should determine automatically what session to use when browser application is launched based on comparison of PLMN codes and GID1
value read form SIM card against the PLMN codes and GID1 associated with each web session record. If only one match is found,then thematched session should be used for establishing the connection. This feature should be enabled for GSM product, therefore the default value for
CHECK_WEB_SESSION_PLMN_CODES_AVAILABLE bit should be set to 1.

1399;"NUMERICAL_DIGIT_USSD_AVAILABLE";/* Most of the "Network Initiated USSD Operations" requires

data in NUMERICAL form, current implementation user has to press # key to switch to NUMERICAL mode of

input. With this new Feature ID the default Entry Method SHALL be set to NUMERICAL.Currently this feature
is requested by PRC(China Mobile Communications Corporation ("CMCC")). Its default value SHALL be ON. This is availability feature id.

1400;"EMAIL_SZ_RESTRICTION_EXTENDED_AVAILABLE";/* Enables/disables support of 14792 (extended

size restriction field) to support 64M size restriction limit - if OFF - old functionality with 64K size restriction
limit will be supported.

1401;"TEXT_MEMO_AVAILABLE";/* This feature Id describes if the new application "Notes"(Text Memo)should be available on the phone or not. If this feature id is set to On then the Text Memo application will be visible in the main menu.

1402;"HOLIDAYS_AVAILABLE";/* This feature Id describes if the Holidays functionality added as part of this
feature will be available. It is possible to pre-load the holiday data on the phone. If the Holidays functionality
is available, then the holidays will be shown in a different color in the datebook monthview, weekview, etc.


1403;"TEXT_MEMO_LOCK_AVAILABLE";/* This feature Id describes if lock is available for text memo application or not.

1404;"JEDITOR_VFKK_FUNCTIONALITY_AVAILABLE";/* For 3G only This flex bit is used to determine some detail of Japanese Editor (feature 13323 that has in mind to enhance Japanese Text Entry) functionality

based on provider (DoCoMo & VodafoneKK). The issue with confirmation notice on editor exit is going to be
fixed by browser team under this ID for VodafoneKK (no Motorola browser is used for DoCoMo). If flex is ON issue mentioned will be fixed. If flex is OFF there are no any change of behavior.

1405;"PP_PHBK_WVIM_INTEGRATION_AVAILABLE";/* WVIM will be integrated with Phonebook App,this
means that in a Phonebook entry user can add IM ID. It is different from presence be integrated which will

display a presence icon in the phonebook. PP stands for the Presence Provider component which will be responsible for the integration.

1406;"PP_PHBK_PTT_INTEGRATION_AVAILABLE";/* PTT will be integrated with Phonebook App, this means
that in a Phonebook entry user can enabled for PTT. It is different from presence be integrated which will
display a presence icon in the phonebook. PP stands for the Presence Provider component which will be responsible for the integration.

1407;"PHBK_MIXED_CHINESE_AND_ENGLISH_SORT_AVAILABLE";/* Currently in Phonebook all English
entries are sorted at one place and then follow all Chinese entries sorted. When this feature is turned on,
the entries are mixed up without any such grouping. So, there can be 2 English entries followed by 2 Chinese entries and English entries again and so on .When the feature is turned off, then, the default
behavior is followed

1408;"LOCAL_SYNC_FEATURE_AVAILABLE";/* This feature is used to exchange data over Local Transport(e.g Bluetooth IRDA etc) using OBEX Protocol. For this feature Syncml will be initiated from the PC only.
Data objects which can synchronized are Datebook,contacts etc.

1409;"ROGERS_WIRELESS_ALS_ACTIVE_AVAILABLE";/* This flex bit is used to determine if the Rogers

Wireless's ALS Active Line and Call Forward Icons in Status Bar are available or not.There is other flex bit for ALS - DUAL_LINE_PHONE_AVAILABLE but it is not enough, because of feature description. New flexbit
ROGERS_WIRELESS_ALS_ACTIVE_AVAILABLE defines if the carrier is Rogers Wireless. If carrier is "Rogers Wireless" it should be ON. If carrier is NOT "Rogers Wireless" it should be OFF.

1410;"EXCHG_ACTIVE_SYNC_LOCK_AVAILABLE";/* This flex value is used to determine whether the Exchange Active Sync app can be locked by the user

1411;"BROWSER_SCROLL_SPEED_EDITABLE_AVAILABLE";/* The Page scroll speed setting option will appear in Web access Menu

1412;"BROWSER_NO_SAVE_AVAILABLE";/* This feature is for not allowing to save image from Browser page which has images when image tag's attribute alt = "no_save". This fetaure of disabling save image by checking image's alt attribute is flexable.

1413;"BROWSER_DELETE_ON_SIM_REMOVAL_AVAILABLE";/* If this feature id is set to ON then browser will

delete cache, cookies, history and visited links from file system when the SIM card in the phone is changed.

If this feature id is set to OFF then browser will not delete cache, cookies, history and visited links from file system even when SIM card in the phone is changed.

1414;"PTT_KODIAK_AVAILABLE";/* If available, the Kodiak PTT functionality will be available including the PTT key, PTT option in Main Menu, PTT contact list, PTT calling, and PTT self-presence icons.

1415;"PTT_USER_ACTIVATE_AVAILABLE";/* If available, the user will be prompted to activate Kodiak AVS (PTT) services. If not available, the handset will attempt to activate Kodiak AVS services without user interaction.

1416;"PTT_CALL_ME_ALERT_AVAILABLE";/* If available,the Kodiak PTT Call-Me Alert feature shallbefunctional

1417;"PTT_BUDDY_ALERT_AVAILABLE";/* If available, the Kodiak PTT Buddy Alert feature shall be functional

1418;"PTT_DISPLAY_SUCCESS_NOTICES_AVAILABLE";/* If available, the PTT notices indicating successful status will be displayed to user.

1419;"PTT_CONTACTS_CSM_PTT_SETTINGS_AVAILABLE";/* If available, the PTT Settings option will be available in the PTT Contact List context sensitive menu (CSM)

1420;"PTT_CONTACTS_CSM_PENDING_INVITES_AVAILABLE";/* If available, the PTT Pending Invites option will be available in the PTT Contact List context sensitive menu (CSM)

1421;"PTT_OPEN_TO_SETTING_AVAILABLE";/* If available, the Open-To PTT menu setting will be available in the PTT menu application

1422;"PTT_SORT_BY_SETTING_AVAILABLE";/* If available,the Sort-By menu item will be available in the PTT menu

1423;"QUICKSEND_AVAILABLE";/* Quick Send feature will allow the user to send media files to apredefined recipient via the Quick Send functionality using MMS transport

1424;"QUICKSEND_COMPOSER_AVAILABLE";/* Controls composer availability when composing Quick Send message. If this value is "on" then message composer will be brought up when user select "send to XXX" menu item from after capture options menu

1425;"BROWSER_AUTORUN_AVAILABLE";/* This bit will indicate that if browser launch index page on
memory card automatically during card injection. If this bit set to 1, browser will be automatically launched when a memory card with index file is attached to handset; if 0,browser will not be automatically launched.

1426;"SECRET_MODE_AVAILABLE";/* For 3G only This flex bit is used to determine if secret mode feature is available. When this bit is on,secret data menu item will be present in the security menu. User can select show/hide from secret data menu. When user selects 'show' secret data, he will be able to edit/view secret entries in phonebook/datebook

1427;"MSG_FONT_SIZE_AVAILABLE";/* User will be able to set the font size for visualizing messages being read or created and it this feature is flexible. When it is flexed on, user will be able to change the font size. If it is flexed off, user will not be able to change the font size.

1428;"SYNCMLDM_CLIENT_INITIATED_SESSION_AVAILABLE";/* This Feature ID decides if the device
supports Client Initiated Sessions. If the Feature is turned ON: The Software Update menu shall display another list item 'Check Server'IF any FOTA Capable Server is available on the phone If the Feature is
turned OFF: The Software Update menu SHALL NOT display any 'Check Server' list item in ANY condition.


1429;"DCM_AUTOUPDATE_TIMEZONE_NOTICE_AVAILABLE";/* DoCoMo requires new functionality for autoupdate and timezone.If user changes the Autoupdate setting from Off/Time Only to Time and Timezone
or On, then a transient needs to be displayed which says "This change to Auto Update will also update calendar events etc.

1430;"PDP_INACTIVITY_TIMEOUT_AVAILABLE";/* This new elements is required for a urgent cingular
requirement to implement inactivity timer in MMINS to watch the data activity for Key largo phones. The
feature is required to make inactivity timer network specific, For some of the network if this id is set to available then the Inactivity timer function ality, will be used and timer will be started to watch the data
activity and if there is no data activity for the timeout period then the session will be terminated,where as if
this feature id is set to not available for some of the network then the inactivity timer functionality will not be used and timer will not be started,session will not terminate for any timeout

1431;"EXTERNAL_MEMORY_RINGTONES_AVAILABLE";/* Indicates whether ringtones are allowed to be set from an external memory device.

1432;"BT_A2DP_AVAILABLE";/* To enable/disable the bluetooth A2DP (Advanced Audio Distribution
Profiles) feature. When the feature is enabled, the handset will support the following functionality:- stream
stereo audio over Bluetooth to a remote device. - Provide an option to use bluetooth from the media player
menu. When the feature is disabled, the handset - will not allow streaming stereo audio over Bluetooth to a remote device. - Will not provide an option to use Bluetooth from the media player menu.

1433;"BT_AVRCP_AVAILABLE";/* To enable/disable the bluetooth AVRCP (Audio Video Remove Control Profile) feature. When this feature is enabled, it will be possible to connect a Remote Control device to the
handset over Bluetooth and send remote control commands to control media player functions on the
handset. For example, when media player is playing a file, the user can press the PAUSE control from a
remote control through Bluetooth and pause the streaming. When this feature is disabled, it will not be possible to connect a Remote Control device to the handset over Bluetooth. Further, the remote control device cannot control media player functions on the handset over Bluetooth.

1434;"MMS_POSTCARD_SERVICE_AVAILABLE";/* This flex bit would determine if the MMS Postcard option is available as a service to the user as a part of the Telefonica Postcard services. If the flex bit is set then the service would be available. If it is not set then the service is not available. The phone would display the telefonica menu options, when this is chosen.


1435;"MMS_PHOTO_STICKER_SERVICE_AVAILABLE";/* This flex bit would determine if the Photo Sticker option is available as a service to the user as a part of the Telefonica Postcard services. If the flex bit is set

then the service would be available. If it is not set then the service is not available. The Photo sticker would appear as one of the menu in the postcard types screen.

1436;"MMS_PHOTO_ID_CARDX4_SERVICE_AVAILABLE";/* This flex bit would determine if the Photo Id card
(4 copies) option is available as a service to the user as a part of the Telefonica Postcard services. If the
flex bit is set then the service would be available. If it is not set then the service is not available. The Photo
ID cardx4 would appear as one of the menu items in the postcard types screen.

1437;"MMS_PHOTO_ID_CARDX8_SERVICE_AVAILABLE";/* This flex bit would determine if the Photo Id card
(8 copies) option is available as a service to the user as a part of the Telefonica Postcard services. If the
flex bit is set then the service would be available. If it is not set then the service is not available. The Photo ID cardx8 would appear as one of the menu items in the postcard types screen

1438;"MMS_PHOTO_10X15_SERVICE_AVAILABLE";/* This flex bit would determine if the Photo ( of 10x15 resolution) option is available as a service to the user as a part of the Telefonica Postcard services. If the flex bit is set then the service would be available. If it is not set then the service is not available. The Photo 10x15 would appear as one of the menu items in the postcard types screen.

1439;"USB_STATE_IND_AVAILABLE";/* When "on", this feature will cause an icon and associated idle screen text to appear on the display to indicate whether the GSM phone is enumerated as a modem or a mass storage device. This satisfies a Midway requirement, as indicated in the FAD and TRS. When "off", the
behavior will be the same as before this feature was added. Currently, only Midway will have this feature enabled. The flex just needs to be created.

1440;"MF_MR_FILTER_AVAILABLE";/* This feature id used to determine whether the feature 10320 is flexed ON or OFF.There will be a state feature id which will determine whether Most Frequent(MF) Setting is ON or Most Recent(MR) setting is ON.

1441;"CAMERA_HARD_KEY_AVAILABLE";/* Indicates what type of idle screen CORElet is installed in the
phone - HSA. This flex bit will be use HSA appication for tell the difference between phone with camera hard key and without camera hard key

1442;"EMAIL_SERVER_TIMESTAMP_AVAILABLE";/* This feature Id will manage presence of ""Email Time
Stamp"" field. Flex On: Enables ""Email Time Stamp"" field to allow selection of message timestamp used for sort by time. Flex Off: ""Email Time Stamp"" will be hidden from user and message sorting will occur by phone timestamp."

1443;"MF_ANIMATIONS_FOLDER_AVAILABLE";/* When enabled (1), the Animations folder is included in MediaFinder Top. SVG and Flash files are tagged as animations. When disabled, SVG and Flash files are treated as videos.

1444;"MF_GAMES_FOLDER_AVAILABLE";/* When enabled, GAMES and APPS entries are included in MediaFinder top level list. When disabled, GAMES and APPS does not appear in MediaFinder top level list.

1445;"MF_THEMES_FOLDER_AVAILABLE";/* When enabled, the Themes entry is included in the MediaFinder top level list When disabled, THEMES does not appear in the Media Finder top level list.

1446;"KEYPAD_LOCK_TIMER_AVAILABLE";/* Inactivity Driven Keypad Lock"" feature will be flexible. The availability bit is used to check if the feature is ON or OFF.

1447;"IDLE_SEARCHING_EONLY_AVAILABLE";/* When the phone is camping on emergency network, idle screen will show searching.. if the flex bit is turned on, and show Emergency Only when this flex bit is turned off.

1448;"IDLE_NOSERVICE_USIM_AVAILABLE";/* When the phone powers on with an unregistered SIM card, idle screen will show No Service if the flex bit is turned on and show Unregistered SIM when this flex bit is turned off.

1449;"IDLE_SEARCHING_NSERVICE_AVAILABLE";/* When no GSM carriers are detected, idle screen will show Searching... if the flex bit is turned on, and show No Service when this flex bit is turned off.

1450;"ENHANCED_RECENT_DIAL_AVAILABLE";/* This ID will be required to indicate whether the 13274 is available in the phonebook or not.

1451;"MMC_BURST_CAPTURE_AVAILABLE";/* Burst photo mode allows the user to quickly capture a series of photos with one press of the capture button.

1452;"USB_SETTINGS_AVAILABLE";/* This feature requires that we add a "Netmon" option to the
existing "USB Settings" menu in the phone. Currently, this menu is made visible when USB mass storage is
enabled on the phone, but since we're adding a new option that is completely independent of mass storage,
we need a new flex bit to indicate whether the menu should be visible. This way, whether the menu appears
can be controlled independently of a particular feature set. The menu is generally accessed via Main Menu->Settings->Connection->USB Settings

1453;"MME_TEXT_LOGGER_AVAILABLE";/* Multimedia Engine Text logger. This would enable or disable additional logging by merely changing a flex bit

1454;"STREAMING_GPRS_NETWORK_AVAILABLE";/* Indicates whether RTSP streaming is allowed when connected to a GPRS network. When set (1) the application will stream data over a GPRS network. When cleared (0) the application will not allow streaming over a GPRS network.

1455;"INCLUDE_BS_FOR_INTERROGATE_AVAILABLE";/* If this feature ID is flexed ON basic service shall be sent in the interrogation procedure to the network otherwise not

1456;"CLI_WALLPAPER_AVAILABLE";/* To control the availability of wallpaper on color CLI. When feature ID is ON wallpaper will be displayed on the CLI when Flip Closed When feature ID is OFF wallpaper will not be displayed on the CLI when Flip Closed

1457;"CLI_DATE_LINE_AVAILABLE";/* To control the availability of Date Line(Region where the Date is displayed) on the CLI. When this feature ID is ON Date will be displayed on the CLI When this feature ID is OFF Date will not be displayed on the CLI

1458;"BACKLIGHT_ON_PARTIAL_DISPLAY_TIMEOUT_AVAILABLE";/* To control the availability of backlight
during the partial display timeout mode(During the partial timeout mode all the pixels in the display glass will be turned off except the region where the Time is displayed to reduce the power consumption)

1459;"MARQUEE_IN_MULTIMEDIA_AVAILABLE";/* This flex bit is used to determine if marquee of text
should be available in Multimedia element.This is required because video decoding will take most of the
mips of processor and mips might not be available for marquee.So if marquee in multimedia element is not smooth,this feature will be turned off.

1460;"FLASH_CIF_CAPTURE_AVAILABLE";/* If the bit is turned on, it will be possible to capture CIF resolution videos on the phone memory. This is necessary because some phones might have performance issues in record CIF videos to the flash.

1461;"OPERATOR_DIAL_IN_IDLE_ONLY_AVAILABLE";/* This flex bit will impact the phone's operation only

when it is operating in the frequency bands: 1900, 850, or 850/1900. Upon dialing ""0+SEND"", with this new feature ID bit: (OPERATOR_DIAL_IN_IDLE_ONLY_AVAILABLE) When it in ON: A call with the number
as ""0"" is raised only when, the phone is in IDLE state. If the phone is not in IDLE state the behavior will be

as per GSM specification. When it in OFF: A call with the number as ""0"" is raised, when phone has one held
call. A call with the number as ""0"" is raised, when it is in IDLE state. In all other states, the behavior will be
as per GSM specification This feature id will be set to ON for cingular network only and for all the other networks the value of the feature id will be set to OFF.

1462;"MEDIA_EDITOR_FROM_CAMERA_AVAILABLE";/* The Media Editor is a new application that allows the
user to edit image/video/audio files (initially images only will be supported). The application can only be
invoked from other applications(such as Picture Viewer) as a service (it cannot start stand-alone).


1463;"SINGLE_VOLUME_KEY_AVAILABLE";/* Single Volume Key"" feature will be flexible. The availability bit is used to check if the feature is ON or OFF. ""This feature will provide a new functionality for the candy bar type phones. Pressing the Single Volume Key shall behave the same way as pressing the Up/Down Volume keys on a phone that has 2 volume keys. The Single Volume Key shall adjust volume, silence alerts, dismiss dialogs and mute audio in an MMS.

1464;"MEDIA_EDITOR_IMAGE_BORDERS_ONSCREEN_AVAILABLE";/* If this flex bit is on, the Media Editor
application will show borders edit operation as on-screen operation (edit operation will be available at the
main media editor screen). If off - borders edit operation will be menu option (edit operation will be available in options menu).

1465;"MEDIA_EDITOR_IMAGE_DISTORTS_AVAILABLE";/* The Media Editor application supports adding the distortions to the image (e.g. "Blur" / "Inflate" / "Pinch" etc...). When flex is enabled this edit option will be shown at the Media Editor application main screen.

1466;"MEDIA_EDITOR_IMAGE_STYLE_SEPIA_AVAILABLE";/* The Media Editor application supports the "Sepia" style effect on images. When flex is enabled this edit option will be shown at the Media Editor application main screen.

1467;"MEDIA_EDITOR_IMAGE_STYLE_NEGATIVE_AVAILABLE";/* The Media Editor application supports the "Negative" style effect on images. When flex is enabled this edit option will be shown at the Media Editor application main screen.

1468;"MEDIA_EDITOR_IMAGE_STYLE_BW_AVAILABLE";/* The Media Editor application supports the "Black
and White" style effect on images. When flex is enabled this edit option will be shown at the Media Editor
application main screen.

1469;"MEDIA_EDITOR_IMAGE_STYLE_RED_AVAILABLE";/* The Media Editor application supports the "Tint red" style effect on images. When flex is enabled this edit option will be shown at the Media Editor application main screen.

1470;"MEDIA_EDITOR_IMAGE_STYLE_GREEN_AVAILABLE";/* The Media Editor application supports the "Tint green" style effect on images. When flex is enabled this edit option will be shown at the Media Editor application main screen.

1471;"MEDIA_EDITOR_IMAGE_STYLE_BLUE_AVAILABLE";/* The Media Editor application supports the "Tint blue" style effect on images. When flex is enabled this edit option will be shown at the Media Editor application main screen.

1472;"MEDIA_EDITOR_IMAGE_MIRROR_ONSCREEN_AVAILABLE";/* If this flex bit is on, the Media Editor application will show mirror edit operation as on-screen operation (edit operation will be available at the main media editor screen). If off - mirror edit operation will be menu option (edit operation will be available in options menu).

1473;"MEDIA_EDITOR_IMAGE_STYLES_ONSCREEN_AVAILABLE";/* If this flex bit is on, the Media Editor application will show styles edit operation as on-screen operation (edit operation will be available at the main media editor screen). If off - styles edit operation will be menu option (edit operation will be available in options menu).

1474;"MEDIA_EDITOR_IMAGE_BRIGHTNESS_ONSCREEN_AVAILABLE";/* If this flex bit is on, the Media Editor application will show brightness edit operation as on-screen operation (edit operation will be available at the main media editor screen). If off - brightness edit operation will be menu option (edit operation will be available in options menu).

1475;"MEDIA_EDITOR_IMAGE_CONTRAST_ONSCREEN_AVAILABLE";/* If this flex bit is on, the Media Editor application will show contrast edit operation as on-screen operation (edit operation will be available at the main media editor screen). If off - contrast edit operation will be menu option (edit operation will be available in options menu).

1476;"MEDIA_EDITOR_IMAGE_SHARPNESS_ONSCREEN_AVAILABLE";/* If this flex bit is on, the Media Editor application will show sharpness edit operation as on-screen operation (edit operation will be available at the main media editor screen). If off - sharpness edit operation will be menu option (edit operation will be available in options menu).

1477;"MEDIA_EDITOR_IMAGE_ROTATE_ONSCREEN_AVAILABLE";/* If this flex bit is on, the Media Editor application will show rotate edit operation as on-screen operation (edit operation will be available at the main media editor screen). If off - rotate edit operation will be menu option (edit operation will be available in options menu).

1478;"NEW_SYNCML_USERAGENT_AVAILABLE";/* If this feature id is enabled Sync ML DS will use the user agent information provided by the browser API instead of using the hard coded user agent

1479;"IMAGEBORDER_AVAILABLE";/* Sets availability of Image Borders FTR 7897. Pre-capture Image borders 7897 allows user to put borders such as hearts, flowers, balloons, etc before capturing in Camera.

1480;"PERSONALIZE_HEADLINES_AVAILABLE";/* (for 3G Only) If this flex bit is ON, the Headlines menu item will be available.

1481;"MARQUEE_AVAILABLE";/* This feature is for marquee of the text,when the text is truncated.An entry is to be provided for this in the Initial Setup.This is going to be flexible based on the availability value of the feature id.

1482;"CARRIER_TASK_STATUS_OPTIONS_AVAILABLE";/* OFF - show only two options - complete and incomplete. ON -- show various options as per earlier implementation or carrier specific one.

1483;"MESSAGE_RECEIPT_ON_AVAILABLE";/* This Feature ID indicates the default value for the receipt report. When it has the value 1 (on), it indicates that the default value for the receipt report is Yes. When it has the value 0 (off), it indicates that the default value for the receipt report is No.

1484;"FWL_ICON_LOGIC_AVAILABLE";/* This flex bit is used to determine if a key icon should be displayed or not in front of a forward locked (fwl) content name. An item is fwl, which means the content can only be used by its owner in the device it was downloaded. Some carrier wants to display the key icon, while others do not want to display.

1485;"AWS_UI_FOR_TTY_MO_CALL_AVAILABLE";/* This available bit is to check if the AWS recommended TTY MO call implementation is need. If it is flexed on, AWS recommended TTY MO call UI is implemented. If it is flexed off, no need of AWS recommended TTY MO call UI implementation.

1486;"SIM_ECC_AVAILABLE";/* This flex bit is used to determine whether SIM ECC feature is available or not.

1487;"SIM_ECC_REPLACEMENT_AVAILABLE";/* This flex bit is used to determine whether emergency numbers in phone will be replaced by SIM ECC numbers.

1488;"OTA_RETAIL_MKT_AVAILABLE";/* This feature bit will turn on and off based on whether the product is

for retail markets or not. Based on the market type different prompts shall be displayed.If this new Feature

DB is turned on then the prompt will be displayed as ""Motorola: has sent a software upgrade to your device"". when it is off it shall display "" Carrier has sent a software upgrade to your device

1489;"IDLE_DISPLAY_SEARCHING_AVAILABLE";/* When this flex bit is enabled, idle screen will show ""Searching…"" instead of ""Emergency Only"" when camping on emergency network; show ""No

Service"" rather than ""Unregistered SIM"" when an unregistered SIM card is detected; show ""Searching…

""
instead of ""No Service"" and an ""x"" next to antenna when no carrier is detected. This flex bit is mutual exclusive from IDLE_SEARCHING_EONLY_AVAILABLE | IDLE_NOSERVICE_USIM_AVAILABLE | IDLE_SEARCHING_NSERVICE_AVAILABLE. Say, if this flex bit is turned on, the other 3 flex bits MUST be
turned off by the flex team. If either of the 3 flex bits is turned on, this one MUST be turned off by flex
team.E.g. if IDLE_NOSERVICE_USIM_AVAILABLE is turned on, the phone will show ""No Service"" rather
than ""Unregistered SIM"" when an unregistered SIM card is detected, while the signal strength, antenna icon and other texts remain unchanged.

1491;"MMC_AP_CLI_PLAYER_AVAILABLE";/* If ON, when the flip is closed and the audio player is running in
background, the user can control the player behavior (pause/stop/play/forward/rewind and volume +/-) with CLI feedbacks of song/playlist being played (author, title, remaining time...). If OFF, there is no user
control of native MP3 player running in background.

1492;"STREAMING_SURE_STREAM_AVAILABLE";/* This feature Id is used to determine whether sure stream is Enabled or not. Sure stream is for calculating available bandwidth and switch accordingly.This is client intiated switching. Provide range for "Value" Data Type (e.g. 1 to 255):

1493;"LIVE_STRMG_VID_HACK_AVAILABLE";/* This feature Id is used to determine whether We Need to Enable The Vidiator Server Hack or not. Vidiator server in H3G was sending the same sequence number in all the PLAY responses in Live stremaing. so ignore the sequence number when this feature ids is enabled.

1494;"STREAMING_STOP_AS_TEARDOWN_AVAILABLE";/* This feature Id is used to determine whether Stop is implemented as Teardown or not. During streaming if user stops the streaming, some customers
wants to close the current streaming session ( By sending teardown ) and others don’t want to send and can
use the same session for next operations also. This feature id is used to determine whether we need to send the Teardown or not.

1495;"STREAMING_REAL_RECONNECT_AVAILABLE";/* This feature Id is used to determine whether Real
Reconnect is Enabled or not. If we are doing real streaming and because of some problem connection not established with the server and client can automatically connect ( without user pressing connect ) again to the server. This feature is used to determine whether real re-connect is available or not.


1496;"STREAMING_LOW_LATENCY_AVAILABLE";/* This feature Id is used to determine whether LOW LATENCY Feature is Enabled or not.During a live broadcast, a viewer experiences a latency of approximately

10 seconds between the time events occur and when they display in RealPlayer. Although this amount of
latency is acceptable in most circumstances, it may be too long in certain cases, such as video-conferencing

or a Web broadcast synchronized to a television event. In these cases, you can lower the end-to-end broadcast latency to as low as two seconds. But if data packets are lost on the network, the broadcast is
more likely to stutter. This feature id is used to determine whether this feature is supported or not.

1497;"STREAMING_RATE_ADAPTATION_AVAILABLE";/* This feature Id is used to determine whether 3GPP Rate Adaptation Feature Enabled or not. If available bandwidth calculations will be done and accordingly streaming switches to suitable bit rate.

1498;"STREAMING_HELIX_ADAPTATION_AVAILABLE";/* This feature Id is used to determine whether HELIX Adaptation Feature Enabled or not. Helix-Adaptation is a rate adaptation mechanism implemented by the Helix Streaming Server. It is aimed at providing an adaptation mechanism mainly for RealMedia content but can also work for 3gp media content.

1499;"STREAMING_SEPARATE_APN_AVAILABLE";/* This feature Id is used to determine whether Seperate APN Enabled or not. Browser will use APN in its web-sessions. Normally there is only one APN which is used
for both browsing as well as Streaming. But with this the operator will not be able to make out the difference between them. Thus we have to support a separate APN for streaming

1500;"STREAMING_VF_IT_SPECIFIC_UA_AVAILABLE";/* This feature Id is used to determine whether we need to Generate a VF ITALY Specific User Agent or not. VF_IT_SPECIFIC_UA_AVAILABLE and VF_KK_SPECIFIC_UA_AVAILABLE are mutually exclusive. When this (STREAMING_VF_IT_SPECIFIC_UA_AVAILABLE )feature ids is ON that time the feature id
UA_GUID_AVAILABLE should be ON.

1501;"STREAMING_VF_KK_SPECIFIC_UA_AVAILABLE";/* This feature Id is used to determine whether we
need to Generate a VF KK Specific User Agent or not. If it is available we should not send GUID in UA. (
means UA_GUID_AVAILABLE should be off ) VF_IT_SPECIFIC_UA_AVAILABLE and VF_KK_SPECIFIC_UA_AVAILABLE are mutually exclusive.

1502;"STREAMING_UA_GUID_AVAILABLE";/* This feature Id is used to determine whether We Need to send
GUID in the User Agent or not. This ( UA_GUID_AVAILABLE ) should be available when VF_IT_SPECIFIC_UA_AVAILABLE is available.

1503;"STREAMING_RTT_PAUSE_AVAILABLE";/*This feature Id is used to determine whether we need to send RTT ( Round Trip Time ) Packets in Paused State or not.

1504;"STREAMING_REAL_USER_AGENT_AVAILABLE";/* This feature Id is used to determine whether we need to Generate a Real Specific User Agent or not.

1505;"STREAMING_NAT_PACKETS_AVAILABLE";/* This feature Id is used to determine whether we need to
send NAT ( Network Address Translation ) packets or not. After establishing connection between client and server, the server will reserved for data transmission but wont opened for transmission. When client sends NAT ( Network Address Translation ) packets before PLAY request then only server actually opens the ports for data transmission.

1506;"LIVE_STRMG_PAUSE_AVAILABLE";/* This feature Id is used to determine whether we need to send
Pause for Live streaming or not. If it is available we can send PAUSE for Live streaming

1507;"WM_LIVE_STRMG_PAUSE_AVAILABLE";/* This feature Id is used to determine whether we need to
send Pause for WM Live streaming or not. If it is available then we can PAUSE the Windows Media ( WM ) live streaming also.

1508;"DM_REGISTRATION_AVAILABLE";/* DM terminal registration by SMS is a new application which will send the registration SMS to DM server. The feature id would decide the availability of the DM terminal registration by SMS.

1509;"NO_TERMINATION_ON_CLOSE_AVAILABLE";/* For common component compilation support only.
Availability bit for feature 13290: "Japan Basic -- No Application Termination on Flip Closure". This feature


prevents mostapps from terminating when the user closes the flip. If this bit is ON, most applications (see
FAD @http: //compass.mot.com/go/165477987 for details on individual apps) will NOT terminate when the

user closes the flip. When the flip is reopened, the application will have its state preserved from before the

closure. If this bit is OFF, all applications will respond to flip closure just as they do in our existing platforms

1510;"SLIDER_AVAILABLE";/* Slider is a new form factor for Capri. The feature id would decide the
availability of the slider on a phone. Based on the slider availability, if an application receives slider close

event, then the app would decide to terminate or continue its operation based on the setting whether to

Terminate/Continue on slider close. The slider open event will result in an open tone generation and would

result in display backlight coming up just like the flip open scenario. When the slider is closed the phone

would behave like a candy bar phone and the display backlight would behave just like in candy bar. This

feature id is limited to provide information on whether slider is present on phone hardware or not, which dl_keypad layer would use for translating the hook switch events from sierra into slider events if
appropriate. Based on the feature availability, the various applications listed in row 7 would call the appropriate handler. The scope of each handler is out of scope for this feature id and should be part of another feature id request for app Termination/Continue setting.

1511;"TRANSPARENT_STORAGE_HOT_SWAP_AVAILABLE";/* This feature id will be used to enable/disable

feature 12604 - Transparent Storage with Hot Swap. If value of this feature id is ON then all functionality for

support of feature 12604 is enabled. If value of this feature id is OFF then all functionality for support of
feature 12604 is disabled. The transparent storage with hotswap feature covers the main use case of supporting the Vodafone transparent storage feature while also having hotswappable removable memory.
Transparent storage simply allowed the user to switch the storage devices by having a selectable item in the

audio, video, and pictures folder summary list and added combined lists to the native audio, video, and
picture viewer applications. It also covers the use cases of removing / inserting the memory card while currently viewing media or java apps.

1512;"FSS_USE_STARTUP_VIEW_AVAILABLE";/* This feature id will be used to enable/disable default startup view for multimedia applications. If value of this feature id is ON then startup view will be read from

FSS_STARTUP_VIEW. If value of this feature id is OFF then will be used last used view. FSS here refers to File System Services.

1513;"CALLING_WHEN_SLIDER_CLOSED_AVAILABLE";/* Slider is a new form factor for Capri. If this

feature is flexed ON (enabled), the slider SHALL support calling through internal speaker when slider is
closed. If this feature is flexed OFF, the slider SHALL NOT support calling through internal speaker when slider is closed.

1514;"KJAVA_USER_PROFILE_AVAILABLE";/* When the feature bit is 1, KVM will genenate a Vadafone specific HTTP user agent header and send it allong with the HTTP request to the server. When the feature bit
is 0, KVM will sends only the HTTP user agent complied with JSR 185, Java Security, to the server

1515;"TTS_TALKING_PHONE_AVAILABLE";/* This feature id is used to indicate if the phone supports the Talking phone feature.

1516;"TELECOIL_FEATURE_AVAILABLE";/* This feature id enables/disables feature of HAC hearing aid compatibility

1517;"IMG_RESIZE_BASED_ON_CREATION_MODE_AVAILABLE";/* When this feature is ON the Image Resize is done based upon the present Creation mode of the phone and rules defined in 18486 are followed.

1518;"DRM_FWD_EXCLUSIVE_AVAILABLE";/* This flex bit is used to determine if only drm fwl files can be downloaded

1519;"640X480_GIF_AVAILABLE";/* For CSC lines All image sizes in all formats must be supported up to the maximum on the phone. Current products support 640x480 JPEG and PNG Images, but only 320x240 GIF images

1520;"STREAMING_CLIENT_PORT_CHECK_AVAILABLE";/* This feature id is used to find out whether we
need to check the server is honoring the client ports or not for SETUP request.But some servers are not sending the same client ports. So to make it flexible, we make the check as flex base

1521;"BROWSER_RETURN_TO_BRW_AVAILABLE";/* When browser is running and some other application
takes the focus and then when that application exits the browser regains focus a prompt "Return to Browser is displayed.

1522;"BLUETOOTH_ALWAYS_DISCOVERABLE_AVAILABLE";/* This Feature ID will be used to make the "Bluetooth Always Discoverable" feature available

1523;"NOTES_OVER_BT_AVAILABLE";/* This Feature ID will be used to make the "Notes Application with Sharing over Bluetooth" feature available

1524;"NICKNAME_AVAILABLE";/* This flex bit is used to determine if Nickname field should be displayed in the form.

1525;"MY5_AVAILABLE";/* This setting is intended to specify My5 feature availability in a phone.

1526;"SUBMENU_SCROLLABLE_ICONIC_TAB_AVAILABLE";/* Controlls the view of the submenu (iconic/List)

1527;"ALWAYS_CONSIDER_SIM_METER_AVAILABLE";/* This feature id is used to determine whether the
message memory meter shall always consider the SIM Card meter in its calculation or shall consider SIM Card meter only if the phone is set to store SMS to SIM Card.

за перевод дам много плюсов - писать о плюсах в Личку

Сообщение отредактировал Osta - 20.7.2007, 14:59

[alexxx32]

Из того что попробовал:
...
------------------------------------------------------------------
Ставил и FF и 01 - размер не изменяется, все те же 300-600 кб (это я говорю только о вышеотмеченных симах)
------------------------------------------------------------------

grudovik это для Л9. Изначально инфа от иностранца Ralf555. Всё работает, до редактирования максимальный размер был ограничен 570 кб, после 700 кб. Увеличение размера особенно заметно при изменении напр освещения (солнечно, облачно). На данный момент максимальный размер фотки у меня 684 кб.

[sanitar]

1196 ; Своя мелодия при выключении, громкость мелодии зависит от громкости клавиатуры, 1 - вкл, 0 - выкл.
1411; Настройки Интернет -> Настр. WAP браузера -> Предпочтения -> Прокрутка страницы, 1 - вкл, 0 - выкл.

Сообщение отредактировал sanitar - 3.8.2007, 18:32

[danger86]

...Из протестированного мною:
1159. Да. Наличие в картинках опции "Печать по ВТ"
1160. ХЗ. Может наконец-то отключит Image Push?
1163. Да. Длинное нажатие кнопки камеры дествительно активирует видеокамеру, но баг - теперь короткое нажатие вообще не реагирует
1174. Нет. Подсветка при заблокированной клаве как была, так и осталась
1176-1189. Да. Все указанные пункты меню в этих битах включаются и отключаются
1195. Да. Ненужный пункт меню "Активный вызов". Я его убрал
1198. Да. Веб-ярлыки мне тоже не нужны - снёс
1204. Нет. Ориентация камеры не поменялась и настройка не появилась и там вообще зависит еще от другого бита
1223. Нет. Типа расширения стереобазы в наушниках - ничего такого не заметил и настройки не появилось
1224. Нет. Добавление басов 12dB @ 40 Hz. Интересно: наши телефоны поддерживают DSP?
1236. Да. Может кому-то пригодится, но не мне . Иконки управления картинками и надписи (Размер, дата) стали непрозрачными
1237. Нет. Типа юзер сам может выбирать, заряжаться его телефону от USB или нет. Весь тел облазил - пункта с выбором не появилось
1242. Нет. Никакого превью после снятия видео я не обнаружил
1243. Нет. Че-то там с курсором в режиме ТАР - ничего нового
1244. Нет. Просмотр видео иконками - как и было, списком
1245. Нет. То же самое. Наверное для телефонов, поддерживающих видео-ID звонка
1281. Нет. Типа должно быть более удобное пролистывание списков
1285. Нет. Вроде меняет правую софт после снимка/видео (сохранить/отослать)
1296. Да. Меню сообщений IM/ICQ появляется в центре сообщений
1304. Нет. К сожалению это тупое растяжение видео осталось на весь экран
1348. Нет. Дата не исчезла с экрана
1349. Нет. Думал появятся старые добрые голосовые метки (которые еще по 20 сек были ) - остался наш, новый диктофон
1358. Нет. Импортирование в справочник номера аськи почемуто не увидел (хотя на 04.05R было)
1383. Нет. Типа знаки зодиака - хз, где они должны быть... В справочнике нету их

Ну вот пока и всё! Тестируйте и переводите и будут вам +++

[danger86]

Shoorf,
Молодец! Лови +
В общем протестировал эти настройки - реально работает. TEQUILA, можешь вносить:

Код

8960;Сжатие JPEG в фотокамере. Качество Хорошее
8992;Сжатие JPEG в фотокамере. Качество Лучшее
9024;Сжатие JPEG в фотокамере. Качество Самое лучшее

Уменьшить сжатие можно убрав ограничение на размер фото:
004E_0001 offset 710, 711, 712 в FF (по умолчанию 00) и 713 в 00 (по умолчанию 50)

Сообщение отредактировал DANGER86 - 22.7.2007, 10:02

[Archy]

На всякий случай подтверждаю, что на L7e можно включить PTT двумя битами в 32-м симе: 1001, 1127.

[blackbox]

Добавляет предельный размер MMS равный 300 Kб, изменяем: SEEM 0032-0001 offset 7F bit 0: (установить на вкл.) SEEM 004e-0001 offset 2e1 bit 2: (установить на вкл.) SEEM 004e-0001 offset 2e2 bit 4, 5 & 7: (все установить на вкл.) SEEM 004f-0001 offset 2e1 bit 2: (установить на вкл.) SEEM 004f-0001 offset 2e2 bit 4, 5 & 7: (все установить на вкл.)

В симе 004e хранятся 32-битные целые, а не массив битов, поэтому правильнее эту информацию представить так:

SEEM 0032_0001 offset 007F bit 0 (MMS_SIZE_LIMIT_EDIT_AVAILABLE) = 1
SEEM 004E_0001 offset 02E0 (MMS_SIZE_LIMIT) = 00 04 B0 00
SEEM 004F_0001 offset 02E0 (MMS_SIZE_LIMIT_DEFAULT?) = 00 04 B0 00

[blackbox]

1341;Сообщения > Настройка > Инфо > Быстрый просмотр (1-откл,0-ВКЛ)

На самом деле этот бит отвечает за управление подсветкой при приходе информационных сообщений:

1341;"CB_DISPLAY_BACKLIGHT_KEEP_OFF_AVAILABLE";/* This feature ID will enable or disable feature 9675 in Messaging Application. When this feature is ON, display backlight won't be turned on when a CB message arrives and the QuickView storage and channel options won't appear in the Setup. */

При включенном бите подсветка не будет загораться, но также отключается быстрый просмотр.

Чтобы сообщения 50-го канала отображались вместо даты в режиме ожидания, и при этом подсветка не включалась сама собой, нужно включить бит 968 CELL_BROADCAST_GEOGRAPHIC_SCOPE_AVAILABLE

Сообщение отредактировал blackbox - 24.9.2007, 16:53

[Zakk_Wilde]

нужно внимательнее читать. Как написано выше, MMS_SIZE_LIMIT находится по смещению 02E0.

Спасибо.Как раз внимательно прочитал, почему и возникло сомнение ,увидев что значение в P2K_AE не совпадает.

ДЛЯ RIZR Z3: ОТПРАВКА MMS 500 kb

1. в P2K_AE SEEM 0032_0001 активируем 1016 MMS_SIZE_LIMIT_EDIT_AVAILABLE (ставим галочку). Или через СИМ как описано в посте №45 ( для Z3 совпадает, проверил)
2. В UniMOTO в СИМЕ 0x004e_0001 offset 02E0-02E3 вместо 00 01 90 00 (могут отличаться) пишем 00 07 D0 00
3. в СИМЕ 0x004f_0001 offset 02E0-02E3 вместо 00 01 90 00 (могут отличаться) пишем 00 07 D0 00

Перегружаемся. У меня вставился видео файл 442 кб. Можно и 1000 кб сделать видимо, прописав 00 0F A0 00, но ОПСОС anyway не поддержит.

КОРРЕКТИРОВКА: MTS на УКРАИНЕ поддерживает до 1000 кб

Сообщение отредактировал Zakk_Wilde - 26.10.2007, 9:50

[~hades~]

Код

1411;"BROWSER_SCROLL_SPEED_EDITABLE_AVAILABLE";/* The Page scroll speed setting option will appear in Web access Menu  

Появляется настройка скорости прокрутки страницы в браузере [Настройки интернет > Настр. WAP браузера > Предпочтения > Прокрутка страницы]. Работает. 1-вкл. 0-выкл.
Давно уже всем известно

Код

1427;"MSG_FONT_SIZE_AVAILABLE";/* User will be able to set the font size for visualizing messages being read or created and it this feature is flexible. When it is flexed on, user will be able to change the font size. If it is flexed off, user will not be able to change the font size.

Дал бы возможность изменять размер шрифта в сообщениях, если б работал.

Сообщение отредактировал KSI1979 - 18.10.2007, 2:29